Samsung DVD-VR355 instruction manual VHS Playback, Variable Search System

Playback

Go To Zero

◄◄

00:00:49

End Search

►►

00:00:13

Scan and Play

►►

00:01:49

Skip

In Play mode, press F.ADV/SKIP button to cue ahead exactly 30 seconds. Press F.ADV/SKIP button repeatedly up to 4 times to cue ahead 2 minutes.

Slow motion

In Still mode, press ►► button for slow motion. Press the ►► button repeatedly to play slow motion speed at 1/10, 1/7, 1/5 times. Press the PLAY button twice to resume normal viewing.

▌S-VHS Playback

The DVD Recorder & VCR allows you to playback high quality S-VHS tapes.

1.Insert an S-VHS tape into the VCR deck.

2.Press ►II (PLAY/STILL) button on the remote control or on the front panel to play an S-VHS tape.

▌Variable Search System

Each time you record a cassette on this DVD Recorder & VCR, an “index” is automatically marked on the tape when recording is started. The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on the direction selected, the indexes are numbered as follows

•This DVD Recorder & VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa.

Go To Zero

Use this feature when you want to search for the 0:00:00 counter position on a cassette.

1.During playback, press the CANCEL button at the point on the tape where you want to set the counter to 0:00:00.

2.While a cassette is stopped, press the ANYKEY button.

3.Press the ▲▼ buttons to select Go To Zero, then press the ENTER button. The VCR will rewind or fast forward, searching for the 0:00:00 counter position, and then automatically stop at that position.

End Search

Use this feature when you want to search for a blank position to record a program on a cassette.

1.While a cassette is stopped, press the ANYKEY button.

2.Press the ▲▼ buttons to select End Search, then press the ENTER button. The VCR will fast forward, searching for a blank position, and then automatically stop at that position. If the VCR reaches the end of the tape during end search, the tape will be ejected.

Forward/Reverse Intro Scan

Use scan and play when you don’t know exactly where a program is located on a cassette tape.

1.While a cassette is stopped, press the ANYKEY button.

2.Press the ▲▼ buttons to select Forward Intro Scan or Reverse Intro Scan, then press the ENTER button. When an Index mark is found, the DVD Recorder & VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark.

English - 54