| System | ||||
No Disc |
|
|
|
|
|
Timer Rec. |
| VCR |
| ► | |
Setup |
| Video Input | : AV 1 | ► | |
|
| DVD EP Mode Time | : 6 Hours | ► | |
|
| Chapter Creator | : Off | ► | |
|
| Quick Recording | Off |
|
|
|
| On |
|
| |
|
|
|
|
|
|
MOVE 
ENTER 
RETURN 
EXIT
|
| System | ||||
No Disc |
|
|
|
|
|
|
Timer Rec. |
| VCR |
|
| ► | |
|
| Video Input |
| : AV 1 | ► | |
Setup |
| |||||
| DVD EP Mode Time | : 6 Hours | ► | |||
|
| |||||
|
| Chapter Creator |
| : Off | ► | |
|
| Quick Recording |
| : Off | ► | |
|
| Off |
|
| ||
|
|
|
| On |
|
|
MOVE |
| ENTER | RETURN | EXIT | ||
|
|
|
|
|
|
|
|
|
|
|
DVDR |
|
|
|
View TV |
| Z | |
Recording | : TV | Z | |
DVDR Menu |
| Z | |
DVDR Operation | Z | ||
Receiver | : Off | Z | |
Setup |
|
| Z |
|
|
|
|
Move | Enter |
| Exit |
|
|
|
|
TV Menu
Quick Recording
It takes about 10 seconds for a disc to load (initialize) every time you turn on the unit. To bypass this initialization process, you can set the Quick Recording feature to On. This enables you to record immediately without having to wait for the disc to load.
1.With the unit in Stop mode/No Disc mode, press the MENU button.
2.Press the ▲▼ buttons to select Setup, then press the ENTER or ► button.
3.Press the ▲▼ buttons to select System, then press the ENTER or ► button.
4.Press the ▲▼ buttons to select Quick Recording, then press the ENTER or ► button.
5.Press the ▲▼ buttons to select On, then press the ENTER or ► button.
■ The Quick Recording is set to Off as default.
■If this function is set to on, power consumption Note will be increased when the unit is powered off.
Anynet+(HDMI-CEC)
Anynet+ is a function that can be used to operate the recorder using a Samsung TV remote control, by connecting the DVD Recorder & VCR to a SAMSUNG TV using an HDMI Cable. (see page 18) (This is only available with SAMSUNG TVs that support Anynet+.)
1.With the unit in Stop mode/No Disc mode, press the MENU button on the remote control.
2.Select Setup using the ▲▼ buttons, then press the ENTER or ► button.
3.Select System using the ▲▼ buttons, then press the ENTER or ► button. The system menu will be displayed.
4.Select
5.Select On using the ▲▼ buttons, then press the ENTER or ► button.
For using Anynet+(HDMI-CEC)
1.Connect the recorder to a Samsung TV with an HDMI cable.
(See page 18)
2. Set the
3. Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
•You can operate the DVD Recorder & VCR by using TV remote control.
(TV buttons that can be used to control the DVD Recorder & VCR : 
,
, 
, 
, 
and 
buttons, 
~ 
button)
•When you press Anynet+ button on the TV's remote control, the OSD to the left will appear.
-DVDR Menu : Same as MENU button ( 
) on the DVD Recorder & VCR remote control.
-DVDR Operation : Same as ANYKEY button ( 
) on the DVD Recorder & VCR remote control.
■ By pressing the PLAY button of the recorder while watching TV, the TV screen will change to the play screen.
■If you play a DVD when the TV power is off, the TV will power On.
■If you turn the TV off, the DVD Recorder & VCR will power off automatically. (When the DVD Recorder & VCR is recording, it can't be powered off.)
■If you change HDMI to other sources (Composite, Component, RF... etc) on your TV while playing a DVD disc, the DVD Recorder & VCR will stop playing. The DVD Recorder & VCR may keep playing certain discs based on their content.
System Setup
English - 39
