Samsung VP-HMX10C/XEK, VP-HMX10/XEF, VP-HMX10C/XEF, VP-HMX10C/XEE, VP-HMX10C/XEO manual Usb, 说明内容……

USB

Message	Icon	Informs that...	Action
		A problem occurred when	● Check the USB cable.
Fail Printer			● Try again the connecting procedure as we
		connecting
	-		instructed.
Connecting		the camcorder via USB to
			● Switch “USB connect” function to “Mass
		a printer.
			Storage.”
		Some problems occur	● Check the USB cable.
Fail USB			● Try again the connecting procedure as we
	-	during connecting USB	instructed.
Connecting
		interface to PC.	● Switch “USB connect” function to
			“PictBridge.”
Ink Error	-	There are some problems	● Check the ink cartridge.
		with ink cartridge.	● Put the new ink cartridge.
Paper Error	-	There are some problems	● Check the paper in the printer. If there is
		with the paper.	no paper, insert the paper.
		There are some problems	● Your HD camcorder does not support this
File Error	-		file format.
		with file.	● Try another file recorded on your HD
			camcorder
		There are some problems	● Turn printer power off and on.
Printer Error	-		● Contact printer manufacturer service
		with printer.
			centre.
Print Error	-	Some problems occur	● Do not remove power source or eject
		during printing.	memory card during printing.

When there is dew condensation, put the camcorder aside for a while before using

●What is dew condensation?

CAUTION Dew condensation happens when a HD camcorder is moved to a place where there is a significant temperature difference from the previous place. The Dew condenses on the external or internal lenses of the HD camcorder, and on the reflection lens. When this happens, it may cause a malfunction or damage to the HD camcorder when using the device with the power on while there is dew condensation.

●What can I do?

Turn the power off and detach the battery pack, and leave it in a dry area for 1~2 hours before using it.

●When does the dew condensation occur?

When the device is relocated to a place with a higher temperature than the previous location, or when using it in a hot area suddenly, it will cause condensation.

-When recording outside in cold weather during the winter and then using it indoors.

-When recording outside in hot weather after being indoors or inside a car where the A/C was running.

Note before sending your camcorder for repair.

●If these instructions do not solve your problem, contact your nearest Samsung authorised service centre.

●Depending on the problem, the built-in memory may need to be initialised or replaced and the data will be deleted. Be sure to back up the data on your PC before sending your camcorder for repair.

Samsung cannot guarantee any loss of your data.

USB

信息	图标	说明内容……	处理
Fail Printer		连接 USB 至打印机时出	•	检查USB数据线。
Connecting	-		•	按照书中的介绍尝试再次连接。
( 打印机连接		现问题。	•	切换“USB Connect”(USB 连接)功
失败 )				能至“Mass Storage”(海量存储)
Fail USB		连接 USB 至电脑时出现	•	检查USB数据线。
Connecting	-		•	按照书中的介绍尝试再次连接。
(USB 连接失		问题。	•	切换“USB Connect”(USB 连接)功
败 )				能至“PictBridge”
Ink Error	-	墨盒出现问题。	•	检查墨盒。
( 墨水错误 )			•	给墨盒注墨。
Paper Error	-	纸张出现问题。	•	检查打印机纸张。如果没有放纸，
( 纸张错误 )				请放入纸张。
File Error			•	您的高清数码摄像机不支持此文
	-	文件出现问题。		件格式。
( 文件错误 )			•	试着使用您的高清数码摄像机再
				次录制。
Printer Error	-	打印机出现问题。	•	将打印机关闭然后再打开。
( 打印机错误 )			•	联系打印机厂商的客服中心。
Print Error	-	在打印的过程中出现问	•	在打印的过程中不要拔掉电源或取
( 打印错误 )		题。		出存储卡。

当有露水凝结的时候，请在使用前放置一段时间。

•什么是露水凝结？

注意	当数码摄像机从一个地方移动到另一个温度明显有差异的地方，就会发生露
	水凝结现象。换句话说，空气中的水蒸汽因为温度的差异转变成露水。并且
	在数码摄像机镜头的内部和反射镜头，以及与播放相关的光盘表面上凝结
	成露水。当发生这种情况时，数码摄像机的录制以及播放功能可能会暂时失
	灵。而且，如果有露水凝结的现象时接通电源，很可能导致数码摄像机失灵
	或者损坏。

•怎样处理呢？

关闭电源并且卸下电池组，在使用数码摄像机之前将其放置于干燥的地方 1~2个小时。

•何时会发生露水凝结？

当设备被重新放置回一个温度更高的地方，或是突然在高温地区使用时，会 发生露水凝结。

-冬天，在室外寒冷的天气中进行录制，然后进入室内使用时。

-从开着空调的室内或者车内进行录制，然后移动到炎热的室外时。 修理数码摄像机前的注意事项

•如果这些说明不能解决问题时，请与最近的三星授权服务中心联系。

•根据出现的问题, 当前的硬盘也许需要初始化或更换并且删除数据。

请务必在数码摄像机送出修理之前，将数据备份到硬盘或是其他存储介质 上。三星公司不能保证不会弄丢您数据。

99_ English 中文 _99