Samsung VP-HMX10C/AND Connecting the USB Cable, 连接usb数据线, Disconnecting the USB cable, 断开usb数据线

Models: VP-HMX10C/XEK VP-HMX10ED/MEA VP-HMX10A/ADL VP-HMX10A/MEA VP-HMX10C/AND VP-HMX10C/HAC VP-HMX10A/KNT VP-HMX10A/XEO VP-HMX10/XEF VP-HMX10A/HAC VP-HMX10C/XEO VP-HMX10C/XEE VP-HMX10C/XEF VP-HMX10/XEE VP-HMX10C/KNT VP-HMX10C/XER VP-HMX10C/MEA VP-HMX10/XEO

1 119
Download 119 pages 15.8 Kb
Page 96
Image 96

connecting to a PC

 

连接到电脑

CONNECTING THE USB CABLE

 

连接USB数据线

To copy the movie fi les and photo fi les to your PC, connect your HD camcorder to the PC with a USB cable.

1.Set the “USB Connect” to “Mass Storage.

page 70

2.Connect the HD camcorder to the PC with a USB cable.

Don’t apply excessive force when inserting or extracting a USB cable into/from a USB jack.

Insert a USB after checking the direction of its insertion is correct.

Use the provided USB cable.

PC

HD camcorder

通过USB数据线连接您的高清数码摄像 机至电脑,复制影音文件和照片文件。

1.设置“USB Connect”(USB

)“Mass Storage”(海量存储)

70

2.通过USB数据线将高清数码摄像机连 接至电脑。

在插入或拔出USB端子的时候

不要用力过猛。

请在插入USB端子之前检查插 入的方向是否正确。

请使用厂家提供的USB数 据线。

Disconnecting the USB cable

First disconnect the USB cable and turn off the HD camcorder. After completing the data transmission, you must disconnect the cable in the following way:

1.Click the “Unplug or eject hardware” icon on the task tray.

2.Select “USB Mass Storage Device” or “USB Disk,” and then click “Stop.”

3.Click “OK.”

4.Disconnect the USB cable from the HD camcorder and PC.

We recommend using the AC power adaptor as the power supply instead of the battery pack.

When the USB cable is connected, turning the camcorder on or off the camcorder may cause the PC to malfunction.

If you disconnect the USB cable from the PC or the HD camcorder while transferring, the data transmission will stop and the data may be damaged.

If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB devices, the HD camcorder may not work properly. If this occurs, remove all USB devices from the PC and reconnect the HD camcorder.

断开USB数据线

先拔掉 USB线,再关闭 高清数码摄像机。

在完成传输数据之后,您必须按照以下方法断开USB数 据线:

1.点击任务栏上安全删除硬件图标。

2.选择“USB Mass Storage Device”“USB Disk,”然后点击停止

3.点击确定

4.断开高清数码摄像机与电脑的连接。

建议您使用交流电源适配器代替电池组为数码摄像机供电。

USB数据线连接,开启或关闭高清数码摄像机会导致电 脑故障。

如果在转移数据的过程中从高清数码摄像机或者电脑上断开 USB数据线,数据传输将会停止并且数据可能损坏。

如果您通过USB HUBUSB数据线与电脑相连或者同时连 接其他的USB设备,数码摄像机可能不会正常工作。如果发 生这种情况,请您从电脑上拔下USB设备,重新连接高清数 码摄像机。

88_ English

中文 _88

Page 96
Image 96
Samsung VP-HMX10C/AND, VP-HMX10/XEF, VP-HMX10/XEO Connecting the USB Cable, 连接usb数据线, Disconnecting the USB cable, 断开usb数据线