Sanyo CHDXR09663 Simple Settings Function, Procedure, Remote Controller Functions Section

1. Simple Settings Function

W-2WAY ECO-i SYSTEM Remote Controller Functions

•This allows the filter lifetime, operating mode priority change, central control address, and other settings to be made for an individual or group- control indoor unit to which the remote controller used for simple settings is connected.

When simple settings mode is engaged, operation stops at the individual or group-control indoor unit to which the remote controller for simple settings is connected.

<Procedure>

ŒŒPress and hold the and buttons simultaneously for 4 seconds or longer.

“ ,” unit No. “ ” (or “ ” in the case of 7

group control), item code “ ,” and settings data

	“	” are displayed blinking on the remote
	controller LCD display (Fig. 1). At this time, the
	indoor unit fan (or all indoor unit fans in the case of
	group control) begins operating.
	Ž If group control is in effect, press the
	button and select the address (unit No.) of the
	indoor unit to set. At this time, the fan at the indoor
	unit begins operating.
4	* If unit No. “		” is displayed, the same setting
		will be made for all indoor units.

Press the temperature setting / buttons to select the item code to change.

Press the timer time / buttons to select the desired setting data.

*For item codes and setting data, refer to the following page.

‘‘Press the button. (The display stops blinking and remains lit, and setting is completed.)

’’Press the button to return to normal remote controller display.

[Remote Controller Functions Section]

2

3

4

1 6 5 RCS-TM80BG

Fig. 1

4 - 2