Using Call Alerts

Call Alerts let you notify someone that you want to communicate with them using Direct Connect. When a user receives a Call Alert, pressing the Direct Connect key places a Direct Connect call directly to the sender.

Note Call Alerts continue to repeat for a set amount of time (default is five minutes) or until the recipient returns the call or ignores the alert.The default Call Alert time can be adjusted in the Settings>Sounds>Alerts>CallAlerts> Repetition menu.

To sendaCallAlert:

1.Enter a Direct Connect number or select a number from Recent History or Contacts.

Note When sending a Call Alert, make sure you select the DC Number for the person you are trying to reach. Go to the contact name and use the arrow keys to scroll through that contact’s numbers until the Direct Connect number is highlighted. (See “To tell if a number is a valid Direct Connect number”on page 51.)

2.Press Msg/Alert (left softkey) and select Call Alert. (A prompt is displayed.)

From the Call Alert prompt, you may attach a brief preset text message. Press the navigation key right or left from the prompt to scroll through available messages.

MakingCalls

Section 2B: Making and Answering Calls

55

Page 69
Image 69
Sanyo PRO-200 manual Using Call Alerts, To sendaCallAlert