Sanyo PRO-200 manual Making a Call UsingVoice-Activated Dialing, ProgrammingVoice DialTags

Models: PRO-200

1 236
Download 236 pages 2.07 Kb
Page 160
Image 160

UsingVoice-Activated Dialing

You can use a voice dial tag to automatically dial a phone number in your Contacts. (A voice dial tag is a command you record and use to place calls without using the keypad.) Your phone can store up to 30 voice dial tags.

Note

Please settheVoice Guide feature (see page 67) to On before using theVoice-Activated Dialing so thatyou can hear voice instructions through the phone.The defaultsetting is Off.

Making a Call UsingVoice-Activated Dialing

1.Press and hold .

2.Follow the voice prompts and recite the entry’s voice dial tag into the microphone.

Tip

You can also makeacall using voice-activated dialing with the phone closed. Press and hold the side call keywhile in standby mode, and follow the voice prompts.

ProgrammingVoice DialTags

1.Select a Contacts entry to which you would like to add a

voice dial tag and press . (See “Finding Contacts Entries”on page 119.)

2.Select the number you want to assign to the voice dial tag, and then press Options (right softkey) > SetVoiceTag>Add.

3.After you are prompted to say a name to program, wait for the beep and then say the name into the microphone.

4.Repeat the name after the beep, as prompted. (The display shows “Voice Tag Recorded.”)

Tip

Record voice dial tags in a quietenvironment.

146 Section 2I: Using Your Phone’s Voice Services

Page 160
Image 160
Sanyo PRO-200 Making a Call UsingVoice-Activated Dialing, ProgrammingVoice DialTags, Using Your Phone’s Voice Services