Setting UpYour Phone
1.Install the battery (if necessary).
■Slide the battery cover latch into its unlock position and slide the battery cover downward to remove it.
■Insert the battery into the opening, making sure the connectors align. Gently press down to secure the battery.
■Replace the battery cover and press up until you hear a click. Lock the battery cover by sliding the latch into its locked position.
2.Press 
to turn the phone on.
■Your phone will turn on, search for Sprint service, and enter standby mode.
■If your phone is not yet activated, or if it is locked, see “Getting Started With Sprint Service”on the following page for more information.
3.Make your first call.
■Use your keypad to enter a phone number.
■Press 
.
Note Your phone’s battery should have enough charge to turn on
your phone, find a signal, setup your voicemail, and make a
call.You should fully charge your battery as soon as possible.
See “Charging the Battery”on page 25 for details.
SettingUpService
Section 1A: Setting Up Service | 3 |
