Sanyo KH3642 / CH3642, XH3642 / CH3642 Specifications Noise Criterion Curves Outdoor Units

1. Specifications

1-10 Noise Criterion Curves

●Outdoor Units

1

MODEL				: CH2442
SOUND LEVEL : 53 dB(A),							NC 44
CONDITION				: Distance 1m,				Height 1m
SOURCE				: 230 - 208 V, 1 Phase, 60 Hz
		90
dB		80
LEVEL,		70								NC	-70
PRESSURE
		60								NC-60
SOUND		50								NC
	∝bar)										-50
OCTAVE BAND		40								NC
	(0dB=0.0002									-40
		30								NC-30
			APPROXIMATE
		20	THRESHOLD OF							NC-20
			HEARING FOR
			CONTINUOUS
			NOISE
		10
			63	125	250	500	1000		2000	4000	8000

BAND CENTER FREQUENCIES, Hz

										0597_C_S
MODEL			: CH4242
SOUND LEVEL : 56 dB(A),						NC 47
CONDITION			: Distance 1m,				Height 1m
SOURCE			: 230 - 208 V, 1 Phase, 60 Hz
	90
	80
dB	70								NC	-70
LEVEL,
	60								NC-60
PRESSURE
	50								NC
										-50
OCTAVE BAND SOUND	40								NC
										-40
	30								NC-30
		APPROXIMATE
	20	THRESHOLD OF							NC-20
	bar)(0dB=0.0002∝	HEARING FOR
		CONTINUOUS
		NOISE
	10
		63	125	250	500	1000		2000	4000	8000

BAND CENTER FREQUENCIES, Hz

0599_C_S

MODEL			: CH3642
SOUND LEVEL : 56 dB(A),						NC 45
CONDITION			: Distance 1m,				Height 1m
SOURCE			: 230 - 208 V, 1 Phase, 60 Hz
	90
	80
dB	70							NC-70
LEVEL,	60							NC-60
PRESSURE
	50							NC-50
OCTAVE BAND SOUND (0dB=0.0002 ∝bar)	40							NC-40
	30							NC-30
	20	APPROXIMATE
		THRESHOLD OF						NC-20
		CONTINUOUS
	10	NOISE
				250		1000	2000	4000	8000
		60	125		500

BAND CAENTER FREQUENCIES, Hz

0598_C_S

REMARKS: 1. Value obtained in the actual place where the unit is installed may be slightly higher than the values shown in this graph because of the conditions of operation, the structure of the building, the background noise and other factors.

2. The test results were obtained from an anechoic room.

NOTE

To evaluate “Noise level” the maximum number of the measured OCTAVE BAND SOUND PRESSURE LEVEL is used. Read the number on each BAND CENTER FREQUENCIES (horizontal axis) ranging from 63 Hz to 8000 Hz and select the maximum value (vertical axis) among them.

SM830082

I - 94