Sharp AR-287 manual Troubleshooting

TROUBLESHOOTING

Always check the message display whenever the copier stops or operation is not possible. The messages will give you easy-to-follow directions. If the messages do not give specific instructions, check the list below.

CHAPTER5 COPIER TROUBLE? Troubleshooting

Problem	Solution
	l Copier plugged in?	Plug the copier into a grounded outlet.
Copier does not operate.
	l Power switch on?	Turn the power switch on.
Copies are too dark or too	l Copy density properly adjusted?	See page 2-16.
light.
	l Is the original placed face up in the	Place the original face up in the
Blank copies.	document feeder tray or face down	document feeder tray or face down on
	on the document glass?	the document glass.
	l Paper too heavy?	Use copy paper within the specified
		range. See page 4-2.
Copies smear if rubbed.
	l Paper damp?	Replace with dry copy paper. Be sure
		to store copy paper in a dry location.
Copy size is different from	l Paper size indicator properly set?	When changing the copy paper size in
the selected paper size.		a tray, be sure to adjust the paper size
		indicator. See page 4-4.
	l Non-standard paper used?	Use standard paper.
		If using special papers, feed the paper
		through the bypass tray.
Paper misfeeds frequently.	l Is paper properly installed?	See pages 2-14 and 4-2.
	l Pieces of paper inside copier?	Remove all pieces of misfed paper.
		See page 5-2.
	l Paper curled or damp?	Store copy paper flat in the wrapper in
		a dry location. See page 4-8.

5-12