Sharp AR-287 manual Staple sort, Using the RADF, Exposure, Auto, 100%

FINISHER (AR-FN1N)

Staple sort

The STAPLE SORT mode staples 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", and 11" x 17" size copies. Stapled sets cannot be delivered to the top tray.

NOTE:

Different size originals cannot be copied onto copy paper of their respective sizes in the STAPLE SORT mode. The paper size selected for the first scanned original will be used for all originals. To copy different size originals in the STAPLE SORT mode, select the paper size for the largest original.

Using the RADF

Stapling position

OPTIONALEQUIPMENT Finisher(AR-FN1N)	OFFSET	SORT	SORT	AUTO
				GROUP
			EXPOSURE
	READY TO COPY.(DOCUMENT FEEDER MODE)
	OUTPUT			OK
	TOP TRAY
			STAPLE
	TRAY
7CHAPTER	OFFSET
	AUTO	1		100%
		AUTO 8/2 11
	EXPOSURE	PAPER SELECT	COPY RATIO

1

2

3

Set the originals in the document feeder tray.

●If the number of copies in one set is more than 50 for 8-1/2" x 11" or 8-1/2" x 11"R paper or 25 for 8-1/2" x 14" or 11" x 17" paper, the copies will not be stapled.

●The stapling position shown in the left figure is the factory de- fault position.

Press the OUTPUT key.

Press the “STAPLE SORT” key on the touch panel.

7-6