Sharp AR-287 manual Transparency Film with Insert Sheets

Indicate whether the insert sheets are copied on or not. ● Select “YES” or “NO” on the touch panel.

TRANSPARENCY FILM WITH INSERT SHEETS

			OK	OK
	CANCEL		OK
	PRINT ON THE INSERT			OK
	SHEETS?
	YES		THE INSERT
	NO
CHAPTER3
SPECIAL FUNCTIONS				1
Transparencyfilm			ORIGINAL 8/2 11
			1	11
			8/2
	1	11
	1.8/2
	2.11	17
		1	11	100%
with	AUTO 8/2
	PAPER SELECT			COPY RATIO
insert
sheets	INTERRUPT		CLEAR ALL

CA

START

CLEAR

C

PLACE NEXT ORIGINAL. PRESS [START].

WHEN FINISHED, PRESS [READ-END].

			READ-END
AUTO	1	11	100%
	AUTO 8/2
EXPOSURE	PAPER SELECT		COPY RATIO

4

5 Press the upper “OK” key.

6 Load transparency film into the bypass tray.

7	Ensure that the desired tray is selected for insert sheets.
	● The copy paper for insert sheets must be the same size as the

transparency film.

8	Make all other selections and press the START key.
	●	If the document feeder is used, scanning of originals and copying
		will start.
	●	If the document glass is used in the SORT mode, proceed to the
		next step.

Replace the finished original with the next original after

9 the START key indicator lights up, and then press the START key. Repeat this step until all originals have been scanned. Then, press the “READ-END” key on the touch panel.

●Copying will start at this time.

●Up to 120 sheets of 8-1/2" x 11" originals or up to 60 sheets of originals larger than 8-1/2" x 11" can be scanned.

●When copying is completed, remove remaining transparency film.

●To cancel the TRANSPARENCY INSERTS function, select the TRANSPARENCY INSERTS function again and press the “CANCEL” key.

3-16