Sharp AR-287 manual 3-24, Repeat Copy, Press the START key, document glass, AUTO 1117 100%

IMAGE EDITING FUNCTIONS

CHAPTER3 SPECIAL FUNCTIONS Image

INTERRUPT CLEAR ALL

CA

START

CLEAR

C

PLACE NEXT ORIGINAL. PRESS [START]. WHEN FINISHED, PRESS [READ-END].

READ-END

AUTO IMAGE

AUTO 1117 100%

EXPOSURE PAPER SELECT COPY RATIO

8	Press the START key.
	●	If the document feeder is used, scanning of originals and copying
		will start.
	●	If the document glass is used in the SORT mode, proceed to the
		next step.

Replace the finished original with the next original after

9 the START key indicator lights up, and then press the START key. Repeat this step until all originals have been scanned. Then, press the “READ-END” key on the touch panel.

●Copying will start at this time.

●Up to 120 sheets of 8-1/2" x 11" originals or up to 60 sheets of originals larger than 8-1/2" x 11" can be scanned.

●To cancel the CENTERING function, press the “CENTERING” key again on the IMAGE EDIT menu screen.

editing functions

REPEAT COPY

C

B

C	C
B	B
C	C
B	B

REPEAT COPY is used to produce repeated images of an original on a single sheet of paper. Border lines can be drawn to separate repeated images.

●Up to 16 (4 x 4) copies can be made on a single sheet.

●When a standard size original is copied onto a standard size paper, copy ratio will be automatically calculated based on the original size and the number of the images required in single sheet of paper. When the copier cannot detect the size of original, however, copy ratio will be automatically set to 100%.

●If the proper reduction ratio is calculated as less than 25%, part of the original will not be copied. In that case the reduction ratio will be set to 25% showing the following message on the display. “IMAGE DOES NOT FIT INTO THE IMAGE AREA. COPY RATIO WILL BE SET TO 25%.”

Place the originals in the document feeder tray or on the

1 document glass.

3-24