Misfeed removal | Sharp AR-287 specs

STAND/500-SHEET PAPER DRAWER (AR-DE1N)

Misfeed removal

A MISFEED HAS OCCURRED.

The copier will stop when a misfeed occurs.

The message “A MISFEED HAS OCCURRED. CLEAR INDICATED AREA. PRESS FOR RECOVERY INSTRUCTIONS.” will appear with a display of paper misfeed locations. Press the INFORMATION key for more detailed information as necessary.

CLEAR	INDICATED AREA.
PRESS	FOR RECOVERY INSTRUCTIONS.

OPTIONAL EQUIPMENT7

Stand/500-sheet paper drawer (AR-DE1N) CHAPTER

1

2

3

4

Open the lower right side cover and remove any misfed paper.

●Be sure to perform this step before pulling out the paper drawer. If not, the paper may be torn as the drawer is opened.

●Be sure not to tear the misfed paper during removal.

Gently lift and pull out the paper drawer. Remove any misfed paper.

Close the paper drawer and the lower right side cover.

Open and close the front cover to cancel the misfeed display.

●Confirm that the misfeed display is cleared.

7-36

Image 148

Sharp AR-287 manual Misfeed removal, Open the lower right side cover and remove any misfed paper

Contents

AR-287 AR-337 AR-407 For Your Records Contents Using this Manual Introduction Chapter Installation Requirements Getting Started Cautions Safety Precautions Power on and OFF Power save modes Auto power shut-off mode Power on and OFFPreheat mode Press the Information key in the standby mode Information Function How to use the touch panel Using the Touch PanelSelection of function Function setting icons Can be easily called by pressing its iconIf multiple special functions are selected, up to six icons Will be displayedPage Making Copies Special Papers manual feed For setting the auditing mode Auditing Accounts Using the Radf Stream feeding mode Using the Radf Sided copies of 1-sided originalsUse the 10-key pad to enter the desired number Copies Press the Start key Press the 2-SIDED Copy key Sided copies from 1-sided originalsPress the key on the touch panel Sided copies from 2-sided originals Sided Copy Ready to COPY.DOCUMENT Feeder Mode Close the document feeder cover Making Copies Copying from Copying from the Document Glass Remove the first original with the next original after Auto REDUCTION/ENLARGEMENT/ZOOM Automatic selection REDUCTION/ENLARGEMENT/ZOOM Manual selection 129 % Insert the copy paper all the way into the bypass tray Then select the bypass traySet the number of copies Press the Paper Select key on the touch panel Two-sided copying with bypass tray Make a copyClose the document cover Replace the first original with the second original Automatic Exposure AdjustmentsText, text/photo, and photo Sort mode Group modeSORT/GROUP Tray JOB Memory Storing a job programPress the Program key Press the STORE/DELETE key on the touch panel Deleting a stored job program JOB MemoryRecalling a job program Interrupting a Copy RUN Press the Interrupt key Special Functions XY Zoom Elect XY Zoom Press the Y keyUse the reduction, enlargement, and Zoom Keys to change the copy ratio in the vertical Y direction Press the Special Modes key Margin ShiftPlace the original in the document feeder tray or on Select the desired shift amounts using the and 5 keys Margin ShiftPress the Margin Shift key on the touch panel Select the shift direction Erase Press the Erase key on the touch panel Select the desired erase mode Adjust the amount of edge erase and/or center erase ifErase Needed Dual page Copying Dual Copy Dual page Copying Ensure that the desired tray is selected Multi Shot Multi Shot Press the upper OK key Enter the desired number of copies Place the originals in the document feeder tray CoversPress the Covers key on the touch panel Select cover placement CoversPress the upper OK key Enter the desired number of copies and press the Start key Transparency Film with Insert Sheets Press the Transparency Inserts key on the touch panel Make all other selections and press the Start key Transparency Film with Insert SheetsEnsure that the desired tray is selected for insert sheets Pamphlet Copy Place the originals in the document feeder tray or on Pamphlet Copy Press the Pamphlet Copy key on the touch panelSelect the type of originals Select the binding position URE Check the copy paper selection Image Editing Functions JOB Build Make all other desired copy mode selections and enter Image Editing FunctionsPress the Image Edit key Press the JOB Build key Centering After the first section of original pages has been fed Press the Centering key Press the Image Edit key on the touch panel Repeat Copy Sheet of copy paper Select the desired copy paper sizePress the Repeat Copy key on the touch panel Cancel OK Border Line Press the Image Edit key on the touch panel Press the B/W Reverse key on the touch panel Centering E F Press the Binding Change key on the touch panel Desired number of copies Text Stamp Date Text Stamp Press the Text Stamp key on the touch panelSelect the desired date format on the touch panel Select the pages to be stamped Select the print direction Press the Select Stamp key on the touch panel Select the stamp position Adjust the darkness of the background of the stampSelect the desired stamp to be printed Cancel OK Position Draft To adjust the exposure, press the Option key Adjust the darkness of the watermarkPress the Watermark key on the touch panel Select the desired watermark to be printed Cancel OK 11Press the upper OK key Number Select the desired page number format Press the page Number key on the touch panelSelect the starting page number OK 9 Press the upper OK key Replace the finished original with the next original after Tandem Copy Press the Tandem Copy key on the touch panel Tandem Copy Copier is installed in the sub copierOn the main copier, press the Start key Setting Review Press the Review keyExample To exit the review screen, press the Exit key Supplies Types and sizes of copy paper PaperLoading copy paper Loading paper in paper trays 1 PaperPush the paper tray firmly back into the copier Changing the copy paper size in the tray Load copy paper into the tray Adding Toner Adding Toner Place the new toner cartridge with the tabs Notches as shown Open the toner collecting container cover Used Toner DisposalDisengage and remove the container from the copier Storage of Supplies Proper storageStore the supplies in a location that is Store copy paper in the wrapper and lying flat Chapter Misfeed Removal Misfeed Removal Misfeed in the bypass tray Misfeed in paper trays 1 Misfeed in the transport area Misfeed around the fusing unit and exit area Close the exit area cover Misfeed in the duplex module Remove the misfed paper from the section below the exit area Maintenance Required Troubleshooting Troubleshooting Self-diagnostic functionPage General Information Part Names and Functions Part Names and Functions Interrupt key and indicator p Start key and indicatorFunction setting icons p.1-9 LCD touch panel Custom Settings key Initial settingsSided Copy key Output key User Maintenance Document glass and document cover Touch Panel Contrast Adjustment Press the Custom Settings key Specifications Copier Specifications Document FeederPage Optional Equipment System Configuration Finisher AR-FN1N SpecificationsPart Names Offset mode NON-OFFSET modeFinisher AR-FN1N Offset stack Staple Sort mode Sort and group Using the Radf Staple sort Staple Sort Sort Group Select the desired stapling position Using the document glass Start key indicator lights up, and then press ScannedRemove the finished original with the next original after Start key. Repeat this step until all originals have been Staple cartridge replacement Remove the rear paper and tape from the cartridge 10Push the finisher toward the copier and latch it in place Staple jam removal Push the finisher toward the copier and latch it in place Misfeed removal Misfeed in the upper transport area Close the top cover Cover of the paper feed area and open the top cover Misfeed in the lower transport area Confirm that the misfeed display is cleared Close the transport Close the paper transport area cover Finisher AR-FN2 Finisher AR-FN2 See next page for details Set the originals in the document feeder tray Press the OK key Using the document glass Exposure Paper Select Copy Ratio Push the new staple cartridge in until it clicks in place Close the stapler coverStapler will strike three times without stapling and feed Cartridge Check that the first staple of the cartridge is at the tip Misfeed removal Push the finisher toward the copier and latch it 10place Large Capacity Tray AR-LC1N When the button lamp goes out, pull the paper tray out Large Capacity Tray AR-LC1NFan the copy paper Load the paper onto the feed table Release lever Gently push the tray back into place STAND/500-SHEET Paper Drawer AR-DE1N STAND/500-SHEET Paper Drawer AR-DE1N Open the lower right side cover and remove any misfed paper Dual Tray Output Unit AR-TR1 Dual Tray Output Unit AR-TR1 Page Sharp Corporation