Sharp AR-287 manual Auto, sided copies from 1-sided originals, Press the START key, 100%

COPYING FROM THE DOCUMENT GLASS

INTERRUPT CLEAR ALL

CA

START

CLEAR

C

5	Press the START key.
	●	If the copier is in the GROUP mode (the sort icon is not displayed

on the touch panel), copying will start and the number in the copy quantity display will decrease by 1 each time a copy is made. To repeat the same copy sequence with a different original, simply replace the original and press the START key.

● If the copier is in the SORT mode, the original will be scanned when the START key is pressed but copying will not begin. Proceed to step 6.

● To cancel a copy run, press the CLEAR ALL ( CA ) key. Copying will stop and the number in the copy quantity display will be reset to 0.

CHAPTER2 MAKING COPIES

3

PLACE NEXT ORIGINAL. PRESS [START]. WHEN FINISHED, PRESS [READ-END].

			READ-END
AUTO	1	11	100%
	AUTO 8/2
EXPOSURE	PAPER SELECT		COPY RATIO

Remove the first original with the next original after the

6 START key indicator lights up, and then press the START key. Repeat this step until all the originals have been scanned. Then, press the “READ-END” key on the touch panel.

●Copying will start after the “READ-END” key is pressed.

●Up to 120 sheets of 8-1/2" x 11" originals or up to 60 sheets of originals larger than 8-1/2" x 11" can be scanned.

Copying from the document glass

2-sided copies from 1-sided originals

Original size detector

Centring scale

AUTO

Set the last page of the document onto the document

1 glass, using the centering scale to position it.

NOTE:

Do not place objects under the original size detector, because they may damage it.

Close the document feeder cover.

2 ● The original size will be indicated on the touch panel, and the paper traywiththecorrespondingpapersizewillbeautomaticallyselected.

3 Press the 2-SIDED COPY key.

2-9