Sharp AR-287 manual Tandem Copy, 3-44, Ensure that the two copiers are connected through the, 100%

TANDEM COPY

CHAPTER3 SPECIAL FUNCTIONS Tandem copy

If this copier is connected with another copier of the same model equipped with the same options through the tandem-connection cable (AR-CA1), copying with the two machines can be performed eventually making the total copy time for multiple copies one-half of the case when using a single copier.

●A dedicated tandem-connection cable AR-CA1 is required for tandem copying.

●The tandem copying can be used only in the sort mode or staple sort mode. The group mode cannot be selected.

●The transparency inserts function cannot be used with this function because the number of copies must be 1 when the transparency inserts function is used.

●The TANDEM COPY key will only be displayed on the touch panel of the machine set as the main copier, (an authorized Sharp Service Technician will do the setting of the main and sub copiers at the time of installation). When the tandem function is selected, (only available on the main copier) the other will then become the sub copier.

The setting procedure is described below.

●INTERRUPT will not function during tandem copying.

●The tandem copying function is not available for the AR-287.

Ensure that the two copiers are connected through the

1 tandem-connection cable and they have been turned on.

On the copier that will be set as the main copier, place

2 the originals in the document feeder tray or on the document glass.

READY TO CO 3	Press the SPECIAL MODES key.
	● The SPECIAL MODES screen will appear.

READY TO COPY.
SPECIAL MODES			OK
MARGIN SHIFT	ERASE		DUAL PAGE
			COPY
MULTI SHOT	COVERS		TRANSPARENCY
			INSERTS
TANDEM	IMAGE EDIT		TEXT STAMP
COPY
AUTO	1	11	100%
	AUTO 8/2
EXPOSURE	PAPER SELECT		COPY RATIO

4	Press the “TANDEM COPY” key on the touch panel.
	● The “TANDEM COPY” key will be highlighted.

3-44