Sharp AR-287 manual Offset stack, NON-OFFSET mode, Output, Top Tray

FINISHER (AR-FN1N)

Offset stack

OUTPUT

TOP TRAY
OFFSET	SO
TRAY
OFFSET
AUTO	AUTO 8

	1	1
	3
	2
1			2
		1
OPTIONALEQUIPMENT Finisher(AR-FN1N)
	1
	3
	2
1			1
CHAPTER7

In the initial setting, the offset tray will move from side to side so that each copy set is offset by approximately 1.2 inch (30 mm).

When the offset stack function is disabled, the offset tray will not move from side to side.

The offset stack function can be enabled or disabled by pressing the OUTPUT key and then the “OFFSET” check mark box on the touch panel.

When the STAPLE SORT mode is selected, the offset stack function will be disabled.

The top tray cannot be used to offset copies.

To select the top tray, press the “TOP TRAY” key on the touch panel.

OFFSET mode

When copying in the SORT mode, each collated set of copies will be stacked offset approximately 1.2 inch (30

mm)from the previous set. When copying in the GROUP mode, copies will be offset stacked in groups of multiple copies from the same original.

NON-OFFSET mode

All copies will be aligned in one stack in the offset tray or the top tray with no offset.

7-4