Sharp AR-287 manual 3-19, Select, Auto, Check the copy paper selection, 100%

PAMPHLET COPY

O	AUTO	11 17	1
URE	PAPER	SELECT	COP

Check the copy paper selection.

7 ● When the desired paper size is not selected, touch the desired paper tray on the touch panel then the AUTO IMAGE key. This lets the copier automatically set the best reduction or enlargement ratio and display it on the touch panel, judging from the placed original size and the desired paper size.

(See steps 2 and 3 of page 2-11.)

1 2 3 INTERRUPT

4 5 6

7 8 9 CLEAR

AUDIT CLEAR	PROGRAM	C
0	P
INTERRUPT	CLEAR ALL

CA

START

CLEAR

C

8

9

Enter the desired number of copies.

Press the START key.

●If the document feeder is used, copying will start after all originals are scanned.

●If the document glass is used, proceed to the next step.

CHAPTER3 SPECIAL FUNCTIONS Pamphlet copy

PLACE NEXT ORIGINAL. PRESS [START]. WHEN FINISHED, PRESS [READ-END].

		READ-END
AUTO	AUTO 11 17	100%
EXPOSURE	PAPER SELECT	COPY RATIO

Replace the finished original with the next original after

10the START key indicator lights up, and then press the START key. Repeat this step until all originals have been scanned. Then, press the “READ-END” key on the touch panel.

●Copying will start at this time.

●Up to 120 sheets of 8-1/2" x 11" originals or up to 60 sheets of originals larger than 8-1/2" x 11" can be scanned.

●If originals of different sizes are used, the copy paper size will be determined based on the original that is scanned first. If originals larger than the first original are used, a portion of the images may not be copied.

●You can make a pamphlet by folding the copies in two and stapling them.

●To cancel the PAMPHLET COPY function, select the PAMPHLET COPY function again and press the “CANCEL” key.

3-19