Sharp AR-287 manual Centering, After the first section of original pages has been fed

IMAGE EDITING FUNCTIONS

CHAPTER3 SPECIAL FUNCTIONS Image editing functions

INTERRUPT CLEAR ALL

CA

START

CLEAR

C

PLACE NEXT ORIGINAL. PRESS [START]. WHEN FINISHED, PRESS [READ-END].

			READ-END
AUTO	1	11	100%
	AUTO 8/2
EXPOSURE	PAPER SELECT		COPY RATIO

CENTERING

8	Press the START key.
	● Scanning of the first section will start.

After the first section of original pages has been fed and

9 the START lights up, remove the scanned originals from the exit area, set the next section of original pages into the document feeder tray and press the START key. Repeat this sequence until all sections have been fed. Then press the “READ-END” key on the touch panel.

●Copying will start at this time.

When the original and copy paper are of different sizes, CENTERING is used to shift the image as a whole to the center of the copy paper. The image will shift only in the left to right direction, not in the top to bottom direction.

●This function will not work when non-standard size originals or copy paper are used. This function cannot be selected when enlargement copying has been selected.

Place the originals in the document feeder tray or on the

1 document glass.

3-22