Sharp AR-287 manual Adding Toner

ADDING TONER

The message “(TONER	SUPPLY IS LOW. PRESS		FOR	For best copying results, be sure to use
GUIDANCE.)” will appear in the message display before the toner				only Sharp Genuine Supplies which are
supply is completely empty. If copying is continued, copies will				designed, engineered, and tested to
gradually become lighter until the copier stops and the message				maximize the life and performance of
display changes to “ADD	TONER. PRESS	FOR GUIDANCE.”		Sharp copiers.
indicating that the toner supply is empty. Toner can be added any time				Look for the Genuine Supplies label on
after the message “(TONER SUPPLY IS		LOW. PRESS	FOR	the toner package.

GUIDANCE.)” appears. To add toner, stop the copier and proceed as
below. When either message appears, you can use the INFORMATION
key for detailed information as necessary.
During long copy runs of multiple originals containing many images
and/or dark shades, “TONER REPLENISHMENT IN PROGRESS.” will
appear and the copier will stop making copies even though toner is left.
The copier will automatically cycle and replenish the toner to the
normal level and then the START key indicator will light up. Press the	GENUINE SUPPLIES
START key to resume copying.

CHAPTER4

1	Open the front cover.
	SUPPLIES
	Adding toner

Pull down the toner hopper lock lever and pull the toner

2 hopper out slowly until it stops.

5X

20X

Tap on the top of the toner cartridge 5 times. Hold the

20X	3 new toner cartridge vertically and vigorously shake it
	up and down about 20 times, then invert the cartridge
	and again shake it up and down about 20 times. This will
	loosen the toner and allow it to flow more easily into the
	toner hopper.

4-5