Sharp AR-287 Covers, 3-13, Auto, Ready To Co, Place the originals in the document feeder tray

COVERS

The COVERS mode is used to place covers on the front, back, or both the front and back of multipage documents.

● Front cover sheets can be copied on, but only on the front side even in the 1-sided to 2-sided and 2-sided to 2-sided copy modes.

The back side of the original designated as the cover will not be copied.

●Back cover sheets cannot be copied on, either on the front side or on the back side.

●Cover sheets must be fed from the bypass tray and must be the same size as the copy paper being used to copy the document.

●When the COVERS mode is selected, the stream feeding mode of the RADF will always be off.

1 Place the originals in the document feeder tray.

CHAPTER3

2

AUTO

3

READY TO CO

4

Press the 2-SIDED COPY key and select the desired duplex mode if needed. Press the “OK” key to close the duplex selection window.

Press the SPECIAL MODES key.

●The SPECIAL MODES screen will appear.

Press the “COVERS” key on the touch panel.

●The setting screen for COVERS will appear.

SPECIAL FUNCTIONS Covers

READY TO COPY.(DOCUMENT FEEDER MODE)

SPECIAL MODES			OK
MARGIN SHIFT	ERASE		DUAL PAGE
			COPY
MULTI SHOT	COVERS		TRANSPARENCY
			INSERTS
PAMPHLET COPY	IMAGE EDIT		TEXT STAMP
AUTO	1	11	100%
	AUTO 8/2
EXPOSURE	PAPER SELECT		COPY RATIO

LOAD COVER STOCK INTO BYPASS-TRAY.
		OK
COVERS	CANCEL	OK

PRINT ON FRONT COVER?

FRONT

YES

BACK

NO

FRONT+BACK

3-13