Power on and OFF, Power save modes | Sharp AR-287 guide

POWER ON AND OFF

The power switch is located on the left side of the copier. When the power switch is turned to the “ON” position, the message “ WARMING

UP. PLEASE WAIT.” will appear in the message display. Warming

Power on up takes about 65 seconds for the AR-287/337 and about 75 seconds for the AR-407. Once the copier is ready, the message display will change to “READY TO COPY.”, and the START key indicator will light up, indicating that copying is possible.

If the copier has been programmed in the auditing mode, the message

“ENTER YOUR ACCOUNT NUMBER. -----” will appear after warming

up. Once a valid account number has been entered, copying will become possible.

Power off

CHAPTER1 GETTING STARTED Power on and off

Power save modes

The copier has two power save modes to reduce overall power consumption and thereby reduce the cost of operation and to conserve natural resources to help reduce environmental pollution. The two power save modes are preheat mode and auto power shut-off mode.

★KEY OPERATOR

The preheat activation time and the auto power shut-off time have been preset at the factory to 15 min. for preheat mode and 60 min. for auto power shut-off mode. These times can be changed as described in the key operator’s guide. It is suggested that you set appropriate times according to the actual usage of the copier.

1-5

Image 9

Sharp AR-287 manual Power on and OFF, Power save modes

Contents

AR-287 AR-337 AR-407 For Your Records Contents Introduction Using this Manual Chapter Installation Requirements Getting Started Cautions Safety Precautions Power save modes Power on and OFF Power on and OFF Auto power shut-off modePreheat mode Information Function Press the Information key in the standby mode Using the Touch Panel How to use the touch panelSelection of function Can be easily called by pressing its icon Function setting iconsIf multiple special functions are selected, up to six icons Will be displayedPage Special Papers manual feed Making Copies Auditing Accounts For setting the auditing mode Stream feeding mode Using the Radf Sided copies of 1-sided originals Using the RadfUse the 10-key pad to enter the desired number Copies Press the Start key Sided copies from 1-sided originals Press the 2-SIDED Copy keyPress the key on the touch panel Sided Copy Sided copies from 2-sided originals Ready to COPY.DOCUMENT Feeder Mode Making Copies Copying from Close the document feeder cover Remove the first original with the next original after Copying from the Document Glass Auto Automatic selection REDUCTION/ENLARGEMENT/ZOOM Manual selection REDUCTION/ENLARGEMENT/ZOOM 129 % Then select the bypass tray Insert the copy paper all the way into the bypass traySet the number of copies Press the Paper Select key on the touch panel Make a copy Two-sided copying with bypass trayClose the document cover Replace the first original with the second original Exposure Adjustments AutomaticText, text/photo, and photo Group mode Sort modeSORT/GROUP Tray Storing a job program JOB MemoryPress the Program key Press the STORE/DELETE key on the touch panel JOB Memory Deleting a stored job programRecalling a job program Press the Interrupt key Interrupting a Copy RUN Special Functions Elect XY Zoom Press the Y key XY ZoomUse the reduction, enlargement, and Zoom Keys to change the copy ratio in the vertical Y direction Margin Shift Press the Special Modes keyPlace the original in the document feeder tray or on Margin Shift Select the desired shift amounts using the and 5 keysPress the Margin Shift key on the touch panel Select the shift direction Press the Erase key on the touch panel Erase Adjust the amount of edge erase and/or center erase if Select the desired erase modeErase Needed Dual Copy Dual page Copying Ensure that the desired tray is selected Dual page Copying Multi Shot Multi Shot Enter the desired number of copies Press the upper OK key Covers Place the originals in the document feeder trayPress the Covers key on the touch panel Covers Select cover placementPress the upper OK key Enter the desired number of copies and press the Start key Press the Transparency Inserts key on the touch panel Transparency Film with Insert Sheets Transparency Film with Insert Sheets Make all other selections and press the Start keyEnsure that the desired tray is selected for insert sheets Place the originals in the document feeder tray or on Pamphlet Copy Press the Pamphlet Copy key on the touch panel Pamphlet CopySelect the type of originals Select the binding position Check the copy paper selection URE JOB Build Image Editing Functions Image Editing Functions Make all other desired copy mode selections and enterPress the Image Edit key Press the JOB Build key After the first section of original pages has been fed Centering Press the Image Edit key on the touch panel Press the Centering key Repeat Copy Select the desired copy paper size Sheet of copy paperPress the Repeat Copy key on the touch panel Cancel OK Border Line Press the B/W Reverse key on the touch panel Press the Image Edit key on the touch panel Centering E F Press the Binding Change key on the touch panel Desired number of copies Date Text Stamp Press the Text Stamp key on the touch panel Text StampSelect the desired date format on the touch panel Select the pages to be stamped Select the print direction Press the Select Stamp key on the touch panel Adjust the darkness of the background of the stamp Select the stamp positionSelect the desired stamp to be printed Cancel OK Position Draft Adjust the darkness of the watermark To adjust the exposure, press the Option keyPress the Watermark key on the touch panel Select the desired watermark to be printed 11Press the upper OK key Cancel OK Number Press the page Number key on the touch panel Select the desired page number formatSelect the starting page number Replace the finished original with the next original after OK 9 Press the upper OK key Press the Tandem Copy key on the touch panel Tandem Copy Copier is installed in the sub copier Tandem CopyOn the main copier, press the Start key Press the Review key Setting ReviewExample To exit the review screen, press the Exit key Supplies Paper Types and sizes of copy paperLoading copy paper Paper Loading paper in paper trays 1Push the paper tray firmly back into the copier Load copy paper into the tray Changing the copy paper size in the tray Adding Toner Place the new toner cartridge with the tabs Notches as shown Adding Toner Used Toner Disposal Open the toner collecting container coverDisengage and remove the container from the copier Proper storage Storage of SuppliesStore the supplies in a location that is Store copy paper in the wrapper and lying flat Chapter Misfeed Removal Misfeed Removal Misfeed in the bypass tray Misfeed in paper trays 1 Misfeed in the transport area Misfeed around the fusing unit and exit area Close the exit area cover Misfeed in the duplex module Remove the misfed paper from the section below the exit area Maintenance Required Troubleshooting Self-diagnostic function TroubleshootingPage General Information Part Names and Functions Part Names and Functions Start key and indicator Interrupt key and indicator pFunction setting icons p.1-9 LCD touch panel Initial settings Custom Settings keySided Copy key Output key Document glass and document cover User Maintenance Press the Custom Settings key Touch Panel Contrast Adjustment Copier Specifications Document Feeder SpecificationsPage Optional Equipment System Configuration Specifications Finisher AR-FN1NPart Names NON-OFFSET mode Offset modeFinisher AR-FN1N Offset stack Sort and group Staple Sort mode Staple sort Using the Radf Select the desired stapling position Staple Sort Sort Group Using the document glass Scanned Start key indicator lights up, and then pressRemove the finished original with the next original after Start key. Repeat this step until all originals have been Staple cartridge replacement 10Push the finisher toward the copier and latch it in place Remove the rear paper and tape from the cartridge Staple jam removal Push the finisher toward the copier and latch it in place Misfeed in the upper transport area Misfeed removal Cover of the paper feed area and open the top cover Close the top cover Confirm that the misfeed display is cleared Misfeed in the lower transport area Close the transport Close the paper transport area cover Finisher AR-FN2 Finisher AR-FN2 See next page for details Set the originals in the document feeder tray Press the OK key Using the document glass Exposure Paper Select Copy Ratio Close the stapler cover Push the new staple cartridge in until it clicks in placeStapler will strike three times without stapling and feed Check that the first staple of the cartridge is at the tip Cartridge Misfeed removal Push the finisher toward the copier and latch it 10place Large Capacity Tray AR-LC1N Large Capacity Tray AR-LC1N When the button lamp goes out, pull the paper tray outFan the copy paper Load the paper onto the feed table Release lever Gently push the tray back into place STAND/500-SHEET Paper Drawer AR-DE1N STAND/500-SHEET Paper Drawer AR-DE1N Open the lower right side cover and remove any misfed paper Dual Tray Output Unit AR-TR1 Dual Tray Output Unit AR-TR1 Page Sharp Corporation