Sharp AR-287 manual FINISHER AR-FN1N, Specifications

FINISHER (AR-FN1N)

The copier has two different finisher modes: one sorts copies into sets matching the sequence of the originals and the second groups copies by original. When the optional finisher (AR-FN1N) is installed, the copier can automatically staple the sorted copies. Each collated set of copies or group of copies can be stacked offset from the previous set.

PART NAMES	Top cover
	Top tray

Finisher release lever

Second tray

(not used in the copy mode)

Paper feed area cover

Paper transport area cover

Offset tray
When copying onto size 11” x 17”
paper, lower the metal support
located at the tip of the offset tray.	Stapler unit

●The top tray and second tray are each furnished with an extendable component, which is to be used when copying onto size 11" x 17" paper.

Specifications

Tray capacity	Top tray:	500 sheets
	Second tray:	500 sheets
	Offset tray:	1,500 sheets (8-1/2" x 11")
		750 sheets (larger than 8-1/2" x 11")
Paper size	Top tray:	5-1/2" x 8-1/2" to 11" x 17"
	Second tray:	5-1/2" x 8-1/2" to 11" x 17"
	Offset tray:	8-1/2" x 11" to 11" x 17"
Paper weight	Top tray:	14 lbs. to 34 lbs. (when face up)
		17 lbs. to 28 lbs. (when face down)
	Second tray:	17 lbs. to 28 lbs.
	Offset tray:	17 lbs. to 34 lbs. (when face up)
		17 lbs. to 28 lbs. (when face down)
	For paper weighing more than 28 lbs., 8-1/2" x 11" is
	the maximum size.
Offset	1.2 inch (30 mm)
Paper size	8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17"
for stapling
Stapling capacity	50 sheets (20 lbs.)
	(25 sheets for 8-1/2" x 14" and 11" x 17" paper)
Power supply	Drawn from the copier
Weight	Approx. 111 lbs. (50 kg)
Dimensions	23-15/64"(W) x 22-1/16"(D) x 39-19/64"(H)
	(590 mm (W) x 560 mm (D) x 998 mm (H))

Specifications are subject to change for improvement without notice.

OPTIONAL EQUIPMENT7

Finisher (AR-FN1N) CHAPTER

7-3