Sharp AR-287 manual Reduction/Enlargement/Zoom, Automatic selection

REDUCTION/ENLARGEMENT/ZOOM

Reduction and enlargement ratios can be selected either automatically with the “AUTO IMAGE” key or manually with the reduction, enlargement or “ZOOM” keys on the touch panel. The zoom function enables precise copy ratio selection from 25% to 400% (for the AR-407) or from 25% to 800% (for the AR-287 and AR-337) in 1% increments.

★ KEY OPERATOR A total of four extra preset copy ratios, two each for reduction and enlargement, can be added. See page 15 of the KEY OPERATOR’S GUIDE.

●The allowable copy ratio range is limited in the following conditions.

PHOTO MODE/MULTI SHOT/PAMPHLET COPY/REPEAT COPY: 25% to 400%

CHAPTER2

READY TO COPY.

1.8/1211

2.1117

	AUTO	1	100%
		AUTO 8/2 11
	EXPOSURE	PAPER SELECT	COPY RATIO
1	11
.8/2
.11 17
		AUTO IMAGE
11 17		100%
PER SELECT		COPY RATIO

1	2	3	INT	CLEAR ALL
				CA
4	5	6
				START
7	8	9
AUDIT CLEAR		PROGRAM
	0	P

Automatic selection		MAKING
	Place the original in the document feeder tray or on the	COPIES
1 document glass.
	● The original size will be detected and indicated on the touch	Reduction/Enlargement/Zoom
2 select the paper tray with the desired paper size.
	panel.
	Press the “PAPER SELECT” key on the touch panel and
3	Press the “AUTO IMAGE” key on the touch panel.
	● The best reduction or enlargement ratio for the selected paper
	size will be automatically set and displayed on the touch panel.
	● If the originals and the selected copy paper are not facing the
	same direction, the image will be automatically rotated to match
	the copy paper. However, if enlargement copying onto a paper
	size larger than 8-1/2" x 11" is performed, the image will not be
	rotated.
	NOTE:
	This feature will not work when original or copy paper is of non-
	standard size.
4 Enter the desired number of copies.
5	Press the START key.
	● To cancel the automatic reduction/enlargement mode, press the

“AUTO IMAGE” key again.

2-11