Misfeed Removal | Sharp AR-287 instruction

MISFEED REMOVAL

A MISFEED HAS OCCURRED.

Misfeed in the RADF

When the RADF misfeeds an original sheet, the copier will stop and the misfeed message will appear.

	CLEAR	INDICATED AREA.

	PRESS	FOR RECOVERY INSTRUCTIONS.

An original misfeed may occur at one of three locations:

(A)in the RADF feed section, (B) in the exit roller, or (C) under the transport belt.

ACB

	(A) Open the feeding roller cover and pull the original gently
Feeding roller cover	to the right and out from the document feeder tray.
	l Be sure to open and close the document feeder cover to cancel
	the misfeed display.

(B) Open the exit roller cover and gently pull the original out.

lBe sure to open and close the document feeder cover to cancel

the misfeed display.

Exit roller cover

(C)Open the feeding roller cover and the document feeder cover, and remove the original.

NOTE:

After misfed originals are removed from locations A, B and/or C, a message may appear indicating the number of originals which must be returned to the document feeder tray. Return the originals and press the START key to resume copying.

CHAPTER5 COPIER TROUBLE? Misfeed removal

5-3

Image 91

Sharp AR-287 manual Misfeed Removal

Contents

AR-287 AR-337 AR-407 For Your Records Contents Introduction Using this Manual Chapter Installation Requirements Getting Started Cautions Safety Precautions Power save modes Power on and OFF Auto power shut-off mode Power on and OFFPreheat mode Information Function Press the Information key in the standby mode How to use the touch panel Using the Touch PanelSelection of function Will be displayed Function setting iconsCan be easily called by pressing its icon If multiple special functions are selected, up to six iconsPage Special Papers manual feed Making Copies Auditing Accounts For setting the auditing mode Stream feeding mode Using the Radf Press the Start key Using the RadfSided copies of 1-sided originals Use the 10-key pad to enter the desired number Copies Press the 2-SIDED Copy key Sided copies from 1-sided originalsPress the key on the touch panel Sided Copy Sided copies from 2-sided originals Ready to COPY.DOCUMENT Feeder Mode Making Copies Copying from Close the document feeder cover Remove the first original with the next original after Copying from the Document Glass Auto Automatic selection REDUCTION/ENLARGEMENT/ZOOM Manual selection REDUCTION/ENLARGEMENT/ZOOM 129 % Press the Paper Select key on the touch panel Insert the copy paper all the way into the bypass trayThen select the bypass tray Set the number of copies Replace the first original with the second original Two-sided copying with bypass trayMake a copy Close the document cover Automatic Exposure AdjustmentsText, text/photo, and photo Tray Sort modeGroup mode SORT/GROUP Press the STORE/DELETE key on the touch panel JOB MemoryStoring a job program Press the Program key Deleting a stored job program JOB MemoryRecalling a job program Press the Interrupt key Interrupting a Copy RUN Special Functions Elect XY Zoom Keys to change the copy ratio in the vertical Y direction XY ZoomPress the Y key Use the reduction, enlargement, and Zoom Press the Special Modes key Margin ShiftPlace the original in the document feeder tray or on Select the shift direction Select the desired shift amounts using the and 5 keysMargin Shift Press the Margin Shift key on the touch panel Press the Erase key on the touch panel Erase Needed Select the desired erase modeAdjust the amount of edge erase and/or center erase if Erase Dual Copy Dual page Copying Ensure that the desired tray is selected Dual page Copying Multi Shot Multi Shot Enter the desired number of copies Press the upper OK key Place the originals in the document feeder tray CoversPress the Covers key on the touch panel Enter the desired number of copies and press the Start key Select cover placementCovers Press the upper OK key Press the Transparency Inserts key on the touch panel Transparency Film with Insert Sheets Make all other selections and press the Start key Transparency Film with Insert SheetsEnsure that the desired tray is selected for insert sheets Place the originals in the document feeder tray or on Pamphlet Copy Select the binding position Pamphlet CopyPress the Pamphlet Copy key on the touch panel Select the type of originals Check the copy paper selection URE JOB Build Image Editing Functions Press the JOB Build key Make all other desired copy mode selections and enterImage Editing Functions Press the Image Edit key After the first section of original pages has been fed Centering Press the Image Edit key on the touch panel Press the Centering key Repeat Copy Sheet of copy paper Select the desired copy paper sizePress the Repeat Copy key on the touch panel Cancel OK Border Line Press the B/W Reverse key on the touch panel Press the Image Edit key on the touch panel Centering E F Press the Binding Change key on the touch panel Desired number of copies Date Text Stamp Select the pages to be stamped Text StampPress the Text Stamp key on the touch panel Select the desired date format on the touch panel Select the print direction Press the Select Stamp key on the touch panel Select the stamp position Adjust the darkness of the background of the stampSelect the desired stamp to be printed Cancel OK Position Draft Select the desired watermark to be printed To adjust the exposure, press the Option keyAdjust the darkness of the watermark Press the Watermark key on the touch panel 11Press the upper OK key Cancel OK Number Select the desired page number format Press the page Number key on the touch panelSelect the starting page number Replace the finished original with the next original after OK 9 Press the upper OK key Press the Tandem Copy key on the touch panel Tandem Copy Tandem Copy Copier is installed in the sub copierOn the main copier, press the Start key To exit the review screen, press the Exit key Setting ReviewPress the Review key Example Supplies Types and sizes of copy paper PaperLoading copy paper Loading paper in paper trays 1 PaperPush the paper tray firmly back into the copier Load copy paper into the tray Changing the copy paper size in the tray Adding Toner Place the new toner cartridge with the tabs Notches as shown Adding Toner Open the toner collecting container cover Used Toner DisposalDisengage and remove the container from the copier Store copy paper in the wrapper and lying flat Storage of SuppliesProper storage Store the supplies in a location that is Chapter Misfeed Removal Misfeed Removal Misfeed in the bypass tray Misfeed in paper trays 1 Misfeed in the transport area Misfeed around the fusing unit and exit area Close the exit area cover Misfeed in the duplex module Remove the misfed paper from the section below the exit area Maintenance Required Troubleshooting Self-diagnostic function TroubleshootingPage General Information Part Names and Functions Part Names and Functions LCD touch panel Interrupt key and indicator pStart key and indicator Function setting icons p.1-9 Output key Custom Settings keyInitial settings Sided Copy key Document glass and document cover User Maintenance Press the Custom Settings key Touch Panel Contrast Adjustment Copier Specifications Document Feeder SpecificationsPage Optional Equipment System Configuration Finisher AR-FN1N SpecificationsPart Names Offset stack Offset modeNON-OFFSET mode Finisher AR-FN1N Sort and group Staple Sort mode Staple sort Using the Radf Select the desired stapling position Staple Sort Sort Group Using the document glass Start key. Repeat this step until all originals have been Start key indicator lights up, and then pressScanned Remove the finished original with the next original after Staple cartridge replacement 10Push the finisher toward the copier and latch it in place Remove the rear paper and tape from the cartridge Staple jam removal Push the finisher toward the copier and latch it in place Misfeed in the upper transport area Misfeed removal Cover of the paper feed area and open the top cover Close the top cover Confirm that the misfeed display is cleared Misfeed in the lower transport area Close the transport Close the paper transport area cover Finisher AR-FN2 Finisher AR-FN2 See next page for details Set the originals in the document feeder tray Press the OK key Using the document glass Exposure Paper Select Copy Ratio Push the new staple cartridge in until it clicks in place Close the stapler coverStapler will strike three times without stapling and feed Check that the first staple of the cartridge is at the tip Cartridge Misfeed removal Push the finisher toward the copier and latch it 10place Large Capacity Tray AR-LC1N Load the paper onto the feed table When the button lamp goes out, pull the paper tray outLarge Capacity Tray AR-LC1N Fan the copy paper Release lever Gently push the tray back into place STAND/500-SHEET Paper Drawer AR-DE1N STAND/500-SHEET Paper Drawer AR-DE1N Open the lower right side cover and remove any misfed paper Dual Tray Output Unit AR-TR1 Dual Tray Output Unit AR-TR1 Page Sharp Corporation