Sharp AR-287 manual 7-20, Offset stack, NON-OFFSET mode, Output, Top Tray

FINISHER (AR-FN2)

Offset stack
OUTPUT
TOP TRAY
OFFSET	SO
TRAY
OFFSET
AUTO	AUTO 8

	1
3	1

2

1

1

2

In the initial setting, the top tray is selected.

To select the offset tray, press the OUTPUT key and then the “OFFSET TRAY” key on the touch panel.

If the offset tray is selected, each copy set will be offset by a minimum of 61/64 inch.

When the offset stack function is disabled, copies will not be offset. The offset stack function can be enabled or disabled by pressing the “OFFSET” check mark box on the touch panel.

When the STAPLE SORT mode is selected, the offset stack function will be disabled.

If the offset tray is selected, only 8-1/2" x 11" paper can be used. The top tray cannot be used to offset copies.

OFFSET mode

When copying in the SORT mode, each collated set of copies will be stacked offset a minimum of 61/64 inch from the previous set. When copying in the GROUP mode, copies will be offset and stacked in groups of multiple copies from the same original.

OPTIONAL EQUIPMENT7

Finisher (AR-FN2) CHAPTER

2

1

3

1

1

NON-OFFSET mode

All copies will be aligned in one stack in the offset tray or the top tray with no offset.

7-20