Using Blackline Master 2.2
Calculation of one-variable statistics for a non-weighted data set is covered
above under Calculator Operations and is presented on Blackline Master 2.1.
Turn the calculator on and press STAT to enter the statistics menu. Touch
A EDIT, press ENTER , to view the statistics data entry screen. If there is a
data set present within the lists on your calculator, use the arrow keys to
move to the list, if necessary, press ▲to highlight the list label. Press DEL
ENTER to delete the old data. Repeat for other lists of data.
Move the highlighter to the cell directly below the L1 in the table.
Enter the following data set generated by rolling a die fifty times.
Value Frequency
18
210
312
49
56
65
Remember to enter the frequencies in L2.
Check the data you have entered and correct any errors you may find. Press
2ndF QUIT to exit the data entry screen. To calculate the numerical
descriptions of the data set, press STAT , touch C CALC, double touch
1 1_Stats, and press 2ndF L1 ,2ndF L2 .