Timer Operations

Timer Operations

The Timer function allows you to set up an operation to be performed automatically at a specified time. Up to 48 operations can be set at any one time, and the time of each can be set up to a week in advance.

You can use this function to take advantage of lower off-peak rates without having to be there when the operation is performed.

Note: The DOCUMENT key cannot be used for a timer transmission.

Initial procedure

To set a timer operation, first perform the following procedure. After you have completed this procedure, go to the procedure for the specific operation you want to set (see the following pages).

1 Press the TIMER key.

TIMER

The display will show:

T

 

TIMER MODE 1=SET, 2=CLEAR

5. Special Functions

2 Press 1 to select SET.

1

3 Press the * key or the # key until the desired operation appears in the display.

Transmission (SEND MODE) Confidential transmission Polling

Serial Polling

Broadcasting

Relay Request Subaddressing Transmission

117

Page 119
Image 119
Sharp FO-6700 operation manual Timer Operations, Initial procedure