Sharp FO-6700 operation manual Relay Broadcast

Relay Request

6 Press the START key to send the document through memory, or the DOCUMENT key to send the document directly from the feeder.

STARTDOCUMENT

or

Relay Broadcast

The fax machine can also act as a relay station. It will receive a document from a fax machine requesting a relay transmission, and automatically broadcast it to the stations that the requesting machine specifies.

To enable a fax machine to request a relay transmission, you must first enter its fax number in the Relay Passcode List. Follow the steps below to enter or clear a fax number.

♦ When your fax receives a relay request from another fax machine, RCVD RELAY REQUEST will appear in the display.

♦ If the telephone billing function is turned on, the fax machine can- not act as a relay station.

♦ To clear a fax number from the Relay Passcode List, you need to know the 2-digit number which identifies it. You can check this number by printing out the Passcode List (see Chapter 7).

1 Press the FUNCTION key, 5, and

FUNCTION

then 4.

5 4

The display will show:

4:RELAY PASSCODE 1=SET, 2=CLEAR

94