Sharp FO-6700 Setting 32 Copy Resolution, Setting 33 Separate Mode, Setting 34 Power Save Type

Optional Settings

Setting 32: COPY RESOLUTION

Use this setting to select the default copying resolution (the resolution used for copying if a setting is not made with the RESOLUTION key). Press 1 (S-FINE) to set the default resolution to SUPER FINE, or 2 to set it to FINE.

♦Initial setting: 2

Setting 33: SEPARATE MODE

If desired, you can have the fax automatically draw a sheet of paper from the paper tray after each fax reception. By loading colored (or large) paper in the paper tray, each colored sheet drawn will act as a separator that makes it easy to distinguish where one multi-page document ends and another begins. A Transaction Report printed after a reception will also be printed from the paper tray to act as a separator sheet. Press 1 to turn on this function (be sure to load appropriate paper in the paper tray), or 2 to turn it off. (Note that this function will not operate for copy jobs. The function will turn off automatically if the paper tray runs out of paper.)

♦Initial setting: 2

Note: If you change the Separate Mode setting, Option Setting 16 will subsequently appear in the display to allow you make an appropriate setting for Cassette Selection.

Setting 34: POWER SAVE TYPE

This option sets the method for turning on Power Save Mode. Press 1 to select REAL TIME (turn Power Save Mode on and off by pressing the POWER SAVE key), or 2 to select TIMER (automatic on and off at preset times). For more information, see Power Save Mode in Chapter 5.

♦Initial setting: 1

172