Sharp MX-4500N manual Remove the original and place the next, original, and then press the COLOUR

Press the [COLOUR START] key ( )

or or the [BLACK & WHITE START] key

( ).

Scanning begins.

If group copy is selected, copying begins.

5If you are using the sort function or other function that requires all originals to be scanned before the copies are printed, you must use the same [START] key that you used to scan the first original to scan each of the remaining originals.

Even if a colour mode is selected, copying will take place in black and white if the [BLACK & WHITE START] key

( ) is pressed.

		Remove the original and place the next
		original, and then press the [COLOUR
	or	START] key (	) or the [BLACK &
		WHITE START] key ( ).
6
		If you are using the sort function or other function that requires

all originals to be scanned before the copies are printed, you must use the same [START] key that you used to scan the first original to scan each of the remaining originals.

Repeat this step until all originals have been scanned.

Place next original. Press [Start]. When finished, press [Read-End].

Read-End

Touch the [Read-End] key.

7

To cancel scanning of the original and copying...

Press the [STOP] key ( ).

14