Sharp MX-3501N manual Select settings for using tab paper, Touch the appropriate paper type key

Paper Select		OK	Select settings for using tab paper.
A4	Plain	A4	(1) Touch the appropriate paper type key.
A4R	Plain	Plain
B4	Plain		(2) Touch the [Tab Paper] key.
A3	Plain		Bypass Tray Type/Size Setting				Cancel
			Select the paper type.				1/2
			Plain	Letter Head	Thin Paper	Transparency
			Pre-Printed Pre-Punched		Heavy Paper	Tab Paper
			Recycled	Colour	Labels	Envelope
							1/2
			(3) Touch the [OK] key.
			Bypass Tray Type/Size Setting			Type	OK
7			Type		Size
			Tab Paper	Auto-Inch	81/2x11
				Auto-AB	A4
							2/2
			(4) Touch the [OK] key.
			Paper Select				OK
			A4	Plain	A4
			A4R	Plain	Tab Paper

B4Plain

A3Plain

When the [OK] key is touched, you will return to the job detail setting screen. Touch the [Job Detail Settings] key to return to the base screen of copy mode.

Press the [COLOUR START] key

or ( ) or the [BLACK & WHITE

START] key ( ).

8

To cancel scanning of the original and copying...

Press the [STOP] key ( ).

Copying will begin.

•If the originals were placed in the document feeder tray, the originals are copied.

•If you are using the document glass, copy each page one page at a time.

If you are using the sort function or other function that requires all originals to be scanned before the copies are printed, you must use the same [START] key that you used to scan the first original to scan each of the remaining originals.

To cancel tab copy...

Touch the [Cancel] key in the screen of step 4.

System Settings (Administrator): Initial Tab Copy Setting

The default image shift width can be set from 0 mm to 20 mm (0" to 5/8"). The factory default setting is "10 mm (1/2")".

98