Sharp MX-4501N manual Touch the Insertion Type a Setting key, Select settings for insert type a

	Special Modes							OK
4		Covers/Inserts			Cancel			OK
		Front Cover	Insertion				Paper Tray
			Type A Setting				Settings
				Insertion
				Settings
		Back Cover	Insertion			Page Layout
			Type B Setting

Touch the [Insertion Type A Setting] key.

Insertion Type A Setting						OK
					Paper Tray
Print on Insert Sheets
					Bypass
					Tray
	Yes	No	1-Sided	2-Sided

		A4
		Plain
(1)	(2)	(A) (B) (3)	(4)

5

Select settings for insert type A.

In the example screen, A4 (8-1/2" x 11") size plain paper in the bypass tray is selected.

(1)If you wish to copy on insert type A, touch the [Yes] key.

(2)If you selected [Yes] in (1), touch the [1-Sided] key if copying will be 1-sided or the [2-Sided] key if copying will be 2-sided.

(3)To change the paper tray used for insert type A, touch the tray select key.

(A)The currently selected paper tray for the insert is displayed.

(B)The size and type of paper in the currently selected

tray is displayed.

In the example screen, A4 (8-1/2" x 11") size plain paper is loaded in the bypass tray.

To change the paper tray for the inserts, touch the tray selection key. (In the screen example, the "Bypass Tray" display is the tray selection key.)

The tray selection screen appears when the tray selection key is touched. Select the paper tray for the inserts in the tray selection screen and touch the [OK] key.

Insertion Type A				OK
	A4	Plain	A4
	A4R	Plain	Plain
	B4	Plain
	A3	Plain

(4) Touch the [OK] key.

If both sides of the insert will be copied on, label sheets, transparency film, and tab paper cannot be used. Tab paper can only be inserted.

	Special Modes			OK
	Covers/Inserts		Cancel	OK
	Front Cover	Insertion		Paper Tray
6		Type A Setting	Insertion	Settings
		Insertion	Settings
	Back Cover			Page Layout
		Type B Setting

If you wish to insert a different type of insert sheet, touch the [Insertion Type B Setting] key.

The screen of step 5 appears. Settings are selected in the same way as for insert type A. Follow the procedures in step 5. When following the procedures, substitute "Insert Type B" for "Insert Type A".

79