Sharp MX-2700G, MX-4501N, MX-2700N Storing Frequently Used Original Sizes, Storing original sizes

Original

XX 420 mm(64 432)

Y		(64	297)
Y	297
		mm

Standard Size	Size Input
(2), (3)	(1)

	● Specifying a non-standard original size
(4)	(1) Touch the [Size Input] tab.
	(2) Enter the X (horizontal) dimension of the
	original.
OK
Auto	With the [X] key highlighted, enter the X (horizontal)
	dimension of the original with the		keys. When
Manual
	the document glass is used, a dimension from 64 mm to
Custom
Size	432 mm (2-1/2" to 17") can be entered.
	When an automatic document feeder is installed, a
	dimension from 140 mm to 432 mm (5-1/2" to 17") can be
	entered.
	If the length or width of the original is less than 140 mm
	(5-1/2"), use the document glass.
	(3) Enter the Y (vertical) dimension of the original.
	Touch the [Y] key and enter the Y (vertical) dimension of
	the original with the	keys. When the document

glass is used, a dimension from 64 mm to 297 mm (2-1/2" to 11-5/8") can be entered.

When an automatic document feeder is installed, a dimension from 131 mm to 297 mm (5-1/8" to 11-5/8") can be entered.

If the length or width of the original is less than 131 mm (5-1/8"), use the document glass.

(4) Touch the [OK] key.

When the [OK] key is touched, you will return to the job detail setting screen. Touch the [Job Detail Settings] key to return to the base screen of copy mode.

Ready to scan for copy.

	Full Colour
	Colour Mode
4	Job Detail
	Settings
	Auto
	Exposure
	100%
	Copy Ratio

						0
		Manual		X 420	2-Sided Copy
				Y 297
					Output
			Plain
				A4
					Special Modes
1.	A4
2.	A4R				File
3.	B4
4.	A3				Quick File

Verify that the correct original size is entered.

•Make sure that the entered numbers appear in the [Original] key. If the numbers are not correct, touch the [Original] key again and enter the correct numbers.

•If the correct numbers appear, touch the [Job Detail Settings] key to return to the base screen of copy mode. The original size display in the base screen will show "Manual".

STORING FREQUENTLY USED ORIGINAL SIZES

You can save special original sizes that you frequently use. This section explains how to store, call up, change, and delete special original sizes.

Storing original sizes

Up to 9 special original sizes can be stored.

Ready to scan for copy.

Full Colour

Colour Mode

1	Job Detail
	Settings

Auto

Exposure

100%

Copy Ratio

Original A4

Plain

A4

1.A4

2.A4R

3.B4

4.A3

Touch the [Job Detail Settings] key.

0

2-Sided Copy

Output

Special Modes

File

Quick File

36