Sharp MX-2700N, MX-4501N Storing A Job Program, Press the PROGRAM key, Touch the Store/Delete tab

STORING A JOB PROGRAM

The procedure for storing copy settings in a job program is explained below.

Press the [PROGRAM] key ( ).

1

LOGOUT

	Job Programs							Exit
		Press program number.
								1/6
2			1		2	3	4
			5	6		7	8

Touch the [Store/Delete] tab.

RecallStore/Delete

Job Programs			Exit
Press program number.			1/6
1	2	3	4
5	6	7	8
	Recall		Store/Delete

Touch a numeric key that is not highlighted.

Numeric keys in which job programs are already stored are highlighted.

3

If a highlighted numeric key is touched, the following screen appears.

The [Store] key can be touched to delete the stored settings and store new settings.

A job program has been already stored in this location.

Cancel Delete Store

When "Disabling Deletion of Job Programs" is enabled in the system settings (administrator), this function cannot be used.

	To store, make selections and press			Cancel
	[OK], to delete, press [Cancel].
	Full Colour		Original	A4
	Colour Mode
	Job Detail			Plain
	Settings
				A4
	Auto	1.	A4	A4
4	Exposure	2.	A4R
	100%	3.	B4
		4.	A3
	Copy Ratio

OK

2-Sided Copy

Output

Program Name

Select the copy settings that you wish to store in the job program and touch the [OK] key.

To assign a name to the program, touch the [Program Name] key. A text entry screen will appear.

Up to 10 characters can be entered for the name.

To enter text, see "6. ENTERING TEXT" in the User's Guide. When you have finished entering the name, touch the [OK] key.

The number of copies cannot be stored.

160