Sharp MX-3500N, MX-4501N Copy Colour Modes, Selecting The Colour Mode, Touch the Colour Mode key

COPY COLOUR MODES

This section explains how to select the colour mode. For a colour original, set the colour mode to Full Colour.

If colour originals and black and white originals are mixed together, set the colour mode to Auto.

Full Colour	The original is copied in full colour.
	The original is copied in the selected colour only.
Single Colour	All colours in the original are changed to the selected colour, which can be selected from red,
	green, blue, cyan, magenta, or yellow.
	Only the red areas of the original are changed to the selected colour; colours other than red are
2 Colour	copied in black. This lets you make copies that are more expressive than black and white copies.
	Red, green, blue, cyan, magenta, or yellow can be selected.
	A colour original is normally copied in Full Colour mode when the [COLOUR START] key
	(	) is pressed.
Auto	However, if colour originals and black and white originals are mixed together, follow the steps
	below to set the colour mode to [Auto].
	The discrimination point for detecting whether originals are colour or black and white can be
	set using "Detect Standard in Auto Colour Mode" in the system settings (administrator).

SELECTING THE COLOUR MODE

1

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

Ready to scan for copy.

	Full Colour
	Colour Mode
2	Job Detail
	Settings
	Auto
	Exposure
	100%
	Copy Ratio

Original A4

Plain

A4

1.A4

2.A4R

3.B4

4.A3

0Touch the [Colour Mode] key.

2-Sided Copy

Output

Special Modes

File

Quick File

Colour Mode

Full Colour	Single Colour
Auto	2 Colour

3 (1)

OKSet the colour mode.

(1) Select the colour mode.

(2) Touch the [OK] key.

(2)

When auto mode is used, there may be some originals for which the mode is not correctly switched between full colour

mode and black and white mode. In this event, press the [COLOUR START] key ( ) or the [BLACK & WHITE

START] key ( ) as appropriate to manually switch between colour copying and black and white copying.

21