Sharp MX-3501N, MX-4501N, MX-2700N, MX-2300G USING A DIFFERENT PAPER TYPE FOR COVERS Covers/Inserts

USING A DIFFERENT PAPER TYPE FOR COVERS (Covers/Inserts)

A different type of paper can be inserted in positions corresponding to front and back covers of a copy job when the automatic document feeder is used. A different type of paper can also be automatically added as an insert at specified pages.

Example of adding covers

Originals

Back

cover

Front cover

Example of adding inserts

Originals

Inserts

Example of adding covers/inserts

Originals

Back

cover

Front

cover

Inserts

About the explanations of covers and inserts

There are various ways of using covers and inserts. To keep the explanations simple, covers and inserts are explained separately. Refer to "Examples of covers and inserts" (page 163) as needed.

Preparations for using covers and inserts

•Load the cover/insert paper in the tray before using the cover/insert function.

•Before selecting the cover/insert function, place the originals in the document feeder tray, select 1-sided or 2-sided copying, and select the number of copies and any other desired copy settings. When these settings have been completed, perform the procedure to select covers/inserts.

•The originals must be scanned using the automatic document feeder. The document glass cannot be used.

•Up to 100 cover/insert sheets can be inserted. Note that two insert sheets cannot be inserted between the same pages.

•This function cannot be used in combination with the saddle stitch function.

•When performing 2-sided copying of 2-sided originals, an insert cannot be added between the front and reverse sides of an original page.

74