Sharp MX-2700G Making A Copy Using The Document Glass, Press the COLOUR START key, Sided Copy

Set the number of copies (sets) with the numeric keys.

7

2-Sided Copy

4

• Up to 999 can be set.

• A single copy can be made even if "0" appears for the number of copies.

If an incorrect number of copies is set...

Press the [CLEAR] key ( ) and then enter the correct number.

		Press the [COLOUR START] key (	)
	or	or the [BLACK & WHITE START] key
		( ).
5	Even if a colour mode is selected, copying will take place in black and white if the [BLACK & WHITE START] key
	( ) is pressed.

To cancel scanning of the original and copying...

Press the [STOP] key ( ).

MAKING A COPY USING THE DOCUMENT GLASS

To make a copy of a book or other thick original that cannot be fed through the automatic document feeder, open the automatic document feeder and place the original on the document glass. This section explains how to make a copy (1-sided copy of a 1-sided original) using the document glass.

Original size detector

Open the automatic document feeder, place the original face down on the document glass, and then gently close the automatic document feeder.

1

Document glass scale

mark

A5 or

5-1/2" x 8-1/2"

B4 or

B5 8-1/2" x 14"

A4 or 8-1/2" x 11" A3 or 11" x 17"

Document glass scale

mark

B5R

A4R or 8-1/2" x 11"R

•Align the corner of the original with the tip of the arrow mark

on the document glass scale.

•Place the original in the appropriate position for its size as shown above.

Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector plate and prevent correct detection of the document size.

12