Sharp MX-4500N, MX-4501N, MX-2700N, MX-2300G, MX-3501N, MX-2300N manual Place paper in the bypass tray

MAKING COPIES USING THE BYPASS TRAY (Copying on special papers)

In addition to plain paper, the bypass tray allows you to make copies on transparency film, tab paper, and other special papers.

For detailed information on paper that can be loaded in the bypass tray, see the Safety Guide. For precautions and other important information when loading paper in the bypass tray, see "LOADING PAPER IN THE BYPASS TRAY" in the User's Guide.

1

2

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

Place paper in the bypass tray.

Insert the paper with print side face down.

When loading paper larger than A4R or 8-1/2" x 11"R, be sure to pull out the bypass tray extension.

Pull the bypass tray extension all the way out. If the bypass tray extension is not pulled all the way out, the size of the loaded paper will not be correctly displayed.

Full Colour						2-Sided Copy
	Auto	Auto	A4
Colour Mode
	Original	Paper Select
						Output
Job Detail
				Plain
Settings
		Special Modes			A4	Special Modes

3	Auto
	Exposure	File
	100%
		Quick File
	Copy Ratio

(1)(2)

Open the paper settings screen.

(1)Touch the [Job Detail Settings] key.

(2)Touch the [Paper Select] key.

	Paper Select				OK
		A4	Plain	A4
		A4R	Plain	Plain
4
		B4	Plain
		A3	Plain

(A) (B)

Set the type and size of paper loaded in the bypass tray.

(A)Shows the size of paper loaded in the bypass tray.

(B)The currently selected paper type will be displayed.

If you wish to use the paper size and paper type shown in

(A) and (B), touch (A) and touch the [OK] key. Go to step 8. To change the paper size or paper type, touch (B) and go to the next step.

46