Sharp MX-2300G, MX-4501N Adjust the exposure level, Using a copy or printed page as an original

	Exposure					OK		Adjust the exposure level.
		Copy of Copy
							1/2	Touch the	key to make the copy darker.
			Auto		Text
		Colour Tone
		Enhancement						Touch the	key to make the copy lighter.
			Text/	Text/Photo
		Manual
			Prtd.Photo					• Using a copy or printed page as an original
			Printed		Photo
			Photo					When using a copy or printed page from the machine as an
								original, touch the [Copy of Copy] checkbox so that a
								checkmark	appears.
								When [Copy of Copy] is selected, only [Text], [Printed Photo],
								or [Text/Prtd.Photo] can be selected for the exposure mode.
								• To enhance the colour of a colour copy...
								Touch the [Colour Tone Enhancement] checkbox so that a
4								checkmark	appears.

• Exposure levels when [Text] is selected:

1 to 2: Dark originals such as a newspaper

3: Normal density originals

4 to 5: Originals written in pencil or light coloured text

•Restrictions when Colour Tone Enhancement is selected

When [Colour Tone Enhancement] is selected in step 4, the following functions cannot be used:

•[Copy of Copy]

•[Auto] or [Light Original] exposure

•[Intensity] in the special modes

•[2 colour] or [Single Colour] in the colour mode

or

5

To cancel scanning of the original and copying...

Press the [STOP] key ( ).

Press the [COLOUR START] key ( ) or the [BLACK & WHITE START] key

( ).

Scanning begins.

•If the originals were placed in the document feeder tray, the originals are copied.

•If you placed the original on the document glass, scan each page one page at a time. If you are using the sort function or other function that requires all originals to be scanned before the copies are printed, you must use the same [START] key that you used to scan the first original to scan each of the remaining originals.

System Settings (Administrator): Copy Exposure Adjustment

The exposure level used for automatic exposure adjustment can be adjusted.

25