Sharp MX-2300N manual MANUALLY SELECTING THE RATIO Preset ratios/Zoom, Touch the Copy Ratio key

Press the [COLOUR START] key ( )

or or the [BLACK & WHITE START] key

( ).

5

To cancel scanning of the original and copying...

Press the [STOP] key ( ).

Scanning begins.

•If the originals were placed in the document feeder tray, the originals are copied.

•If you placed the original on the document glass, scan each page one page at a time. If you are using the sort function or other function that requires all originals to be scanned before the copies are printed, you must use the same [START] key that you used to scan the first original to scan each of the remaining originals.

•To cancel automatic ratio selection...

Touch the [Auto Image] key so that it is no longer highlighted.

•To return the ratio to 100%...

To return the ratio setting to 100%, touch the [Copy Ratio] key to display the ratio menu and then touch the [100%] key.

MANUALLY SELECTING THE RATIO (Preset ratios/Zoom)

The enlargement and reduction keys can be used to select five preset ratios each (from a maximum of 400% to a minimum of 25%).

In addition, the zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

1

When the automatic document feeder is used, the ratio selection range is 25% to 200%.

Ready to scan for copy.

Full Colour

Colour Mode

Job Detail

Settings

2 Auto

Exposure

100%

Copy Ratio

Original A4

Plain

A4

1.A4

2.A4R

3.B4

4.A3

0Touch the [Copy Ratio] key.

2-Sided Copy

Output

Special Modes

File

Quick File

27