Sharp MX-2700N, MX-4501N, MX-2300G Interrupting a Copy RUN Interrupt copy, Touch the Interrupt key

INTERRUPTING A COPY RUN (Interrupt copy)

When you need to make an urgent copy and the machine is busy with a long copy run or other job, use interrupt copy. Interrupt copy temporarily stops the job in progress and lets you perform the interrupt copy job.

1

Copies in progress from tray 1. Ready to scan for next copy job.

Full Colour

Colour Mode

Job Detail

Settings

Auto
		1.	A4
Exposure		2.	A4R
		3.	B4
100%
	4.		A3

Copy Ratio

		Touch the [Interrupt] key.
	0
Interrupt

2-Sided Copy

Output

Plain

A4

Special Modes

File

Quick File

2

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

3

4

Select copy settings for the interrupt

or copy job and start copying.

The interrupt copy job begins.

After the interrupt copy job is printed, the job that was interrupted resumes.

To cancel scanning of the original and copying...

Press the [STOP] key ( ).

•If user authentication is enabled, the login screen will appear when the [Interrupt] key is pressed. Enter your user name and password to log in. The number of copies made will be added to the count of the user that logged in.

•Depending on the settings of the job in progress, the [Interrupt] key may not appear.

•Depending on the settings of the job in progress, the [Reserve] key may appear instead of the [Interrupt] key. Unlike interrupt copy, reserve copy does not temporarily stop the job in progress. Instead, the reserve copy job begins when the job in progress is finished.

•Interrupt copy cannot be used in combination with the following special modes:

Job Build, Tandem Copy, Book Copy, Card Shot, Multi-Page Enlargement, Proof Copy

•If the document glass is used for an interrupt copy job, 2-sided copying, sort copying, and staple sort copying cannot be selected. If any of these functions are necessary, use the automatic document feeder.

48