Sharp MX-2700G, MX-4501N Set the margin shift, Press the Colour Start key Or the Black & White

(1)(2)

	Special Modes
	Margin Shift				Cancel
4			Side 1
	Right	Left	Down	(0	20)
			10
				mm

(3)Set the margin shift.

				(1)	Touch the margin shift position.
		OK
					Select one of the three positions.
		OK
Side 2				(2)	Set the amount of the margin shift with
	10		(0 20)
			mm		.
					0 mm to 20 mm (0" to 1") can be entered.
				(3)	Touch the [OK] key.
					You will return to the base screen of copy mode.

Press the [COLOUR START] key

or ( ) or the [BLACK & WHITE

START] key ( ).

5

To cancel scanning of the original and copying...

Press the [STOP] key ( ).

Copying will begin.

•If the originals were placed in the document feeder tray, the originals are copied.

•If you are using the document glass, copy each page one page at a time. If you are using the sort function or other function that requires all originals to be scanned before the copies are printed, you must use the same [START] key that you used to scan the first original to scan each of the remaining originals.

Rotation copy cannot be used in combination with margin shift.

To cancel the margin shift setting...

Touch the [Cancel] key in the screen of step 4.

System Settings (Administrator): Initial Margin Shift Setting

The default margin shift setting can be set from 0 mm to 20 mm (0" to 1"). The factory default setting is 10 mm ("1/2")".

60