Sharp MX-2300N, MX-4501N Touch the key of the desired destination, position, Touch the OK key

		Touch the key of the desired destination
Move	OK
		position.
Select the location to move the selected item.

The touched position key is highlighted and the print position changes.

The keys that show the print positions will appear as follows depending on the state of the settings.

6

Not selected, stamp setting has not been selected.

Selected during selection of the stamp setting.

Not available, stamp setting has already been allocated.

The above key is the top left key. The appearance of the keys varies by position.

If you wish to swap the position of the selected print item with the position of another print item, temporarily move either one of the print items to an unoccupied position and then switch the print positions.

Move OK

Select the location to move the selected item.

7

Touch the [OK] key.

If you attempt to move the print item to a position that is already occupied by another print item, a message will appear asking you if you wish to overwrite the other print item. To overwrite the other print item, touch the [Yes] key. To cancel the move, touch the [No] key.

An item has been already selected to this location. Overwrite the item?

No Yes

Layout						OK
1	2	3	1	AAA AAA	2	3
8					CONFIDENTIAL	DO NOT COPY
			4		5	6
4	5	6			1,2,3..

Touch the [OK] key.

	Stamp	Layout	Cancel	OK
9				1/2
	Date	Stamp

Page

Text

Numbering

Touch the [OK] key.

123