Sharp UX-CD600 Display, UP and DOWN arrow keys, Line 1 key, Line 2 key, Panel release, STOP key

6

7

Display

This displays messages and prompts to help you operate the machine.

MIC

The microphone is located here. Speak toward MIC when using the speakerphone or when recording an outgoing message or memo.

8

9

UP and DOWN arrow keys

Enlarge/reduce setting: When making a copy of a document, press these keys to select an enlarge/reduce setting (page 105).

Volume setting: When a document is not in the feeder, press these keys to change the handset volume when the handset is lifted, the speaker volume when the SPEAKER key has been pressed, or the ringer volume at any other time (page 39).

FUNCTION key settings: Press these keys after pressing the FUNCTION key to scroll through the FUNCTION MODE settings.

Line 1 key

Press this key to select line 1 when making a call from the machine or sending a fax (pages 59 and 86).

10Line 2 key

Press this key to select line 2 when making a call from the machine or sending a fax (if you have connected a second line to the machine) (pages 59 and 86).

11Panel release

Press this release to open the operation panel.

12STOP key

Press this key to cancel an operation before it is completed.

13COPY/HELP/POLL key

When a document is in the feeder, press this key to make a copy of a document (page 105). When a document is not in the feeder, press this key to print out the Help List, a quick reference guide to the operation of your fax machine. This key is also used after dialling to poll (request fax transmission from) another machine (page 114).

14START/MEMORY key

Press this key after dialing to begin fax transmission (page 86). Press this key before dialing to send a fax through memory (page 95). The key can also be pressed in the date and time display to show the percentage of memory currently used.

9