Sharp UX-CD600 Entering Your Name and Fax Number, Stop, Start/Memoryfunction, Display, Entry Mode

Entering Your Name and Fax Number

Entering Your Name and Fax Number

Before you can begin sending faxes, you must enter your name and fax (telephone) number. You also need to set the date and time.

Important!

Once you enter this information, it will automatically appear at the top of each fax page you send.

FCC regulations require that your name, telephone/fax number, and the date and time appear on each fax message you send. Enter your name and fax number here and set the date and time as explained in the following section to have the fax machine include this information automatically at the top of your fax messages.

STOP

Note: Only one fax number can be entered. If you have connected two lines to the machine, it is recommended that you enter the number of line 2, as line 2 is normally used as a fax line.

START/MEMORYFUNCTION

1

2

3

Press FUNCTION once and		Display:
		twice on
the machine.		ENTRY MODE
Press	once.	OWN NUMBER SET
Press	once.	ENTER FAX #

30