Sharp UX-CD600 Automatic redialing, Redial, Sending a Fax by Automatic Dialing, Faxes

Sending a Fax by Automatic Dialing

Redial

You can automatically redial the last number dialed on the fax machine.

Note: The fax machine and the cordless handset each retain their own separate redial numbers.

1 Load the document(s).

RESOLUTION/

• If desired, press RECEPTION MODE to set the

resolution and/or contrast.

2 Press once. <REDIAL> appears in the display, followed by the last

number dialed. Make sure the number that appears is the number you wish to dial.

3 Press START/MEMORY . Dialing begins.

Note: If a fax transmission is unsuccessful and DOCUMENT JAMMED appears in the display, remove the document as explained on page 137. (This may occur if the other fax machine doesn’t respond properly when you attempt to send the document.)

Sending	Faxes
4.

Automatic redialing

If you use automatic dialing (including Direct Keypad Dialing) to send a fax and the line is busy, the fax machine will automatically redial the number. The fax machine will make three redial attempts at intervals of five minutes. During this time, RECALLING will appear in the display, followed by a two-digit number assigned to the fax job. You will not be able to dial any other locations while the message appears.

93