Sharp UX-CD600 operation manual Receiving Faxes Manually, Answering with the machine’s handset

Receiving Faxes Manually

Receiving Faxes Manually

To receive a fax manually, you must answer the call personally using the machine handset, a cordless handset, or an extension phone connected to the same line.

Faxes can only be received manually in TEL mode. A fax can be received manually on line 1, or on line 2 if you answer the call before the machine answers automatically.

Answering with the machine’s handset

Important: If a document is loaded in the machine’s feeder, remove it before performing the steps below. (Fax reception is not possible when a document is in the feeder.)

1 When the machine rings, pick up the handset.

2 If you hear a fax tone, wait until the display shows RECEIVING and then replace the handset.

Beep

RECEIVING

If RECEIVING does not appear (or if you have set the Fax Signal Receive setting to NO), press

START/MEMORY to begin reception.

3 If the other party first speaks with you and then wants to send a fax, press

START/MEMORY

START/MEMORY

after speaking. (Press

RECEIVING

before the sender presses their Start key.)

•When RECEIVING appears in the display, hang up.

100