Sharp UX-CD600 Answering, System, hanging up during message playback, first enter and to stop

Transfer Function

1				Display:
	Press FUNCTION once and		once.	T.A.D. SETTING
2	Press	once and	3 times.	TRANSFER FUNC
3	Press	once.		TRANSFER FUNC
				1=YES, 2=NO

4 Press to turn on the Transfer function. (To turn off, press .)

5 Press the number of the box for which	The display briefly shows
	your selection, then:
you want the Transfer function to
operate (for the general box, press	ON TAD FAILURE
).

6 Press STOP to return to the date and time display.

7 Each time the answering system receives a message in the selected box, it will call your programmed transfer number. When you answer, you will hear your recorded message telling you that the call is a transfer call. On

the dial pad of your phone, enter , your remote code number (see

page 76) if the general box or a personal box without a passcode was selected in Step 5, or the box passcode number if a personal box with a

passcode was selected, and then . Your messages will play.

•You can also perform any of the remote operations described in Remote Operations later in this chapter (see page 76).

Note: When you hang up after a transfer call, the machine will not immediately resume normal operation. If you want the machine to accept calls

immediately after a transfer call, enter twice before hanging up (if

hanging up during message playback, first enter and to stop

playback, then enter twice).

Answering	System
3.

75