Sharp UX-CD600 Setting a Passcode for a Personal Box, To delete or check an outgoing message

PLAY/

HOLD

Setting a Passcode for a Personal Box

3	Press	once.		FEB-20 10:30
				START: RECORD
4
	Press	START/MEMORY	and speak facing “MIC” on the operation panel to

record the message.

•While recording, the display will show the time left to record.

5 When finished, press STOP .

To delete or check an outgoing message

To delete or check an outgoing message, follow Steps 1 through 3 of the

above procedure to select the message, and then press to delete or

DELETE

to check. Note that the general outgoing message cannot be deleted. If you need to change it, simply repeat the recording procedure.

Note: If a passcode has been set for a personal box as explained below, deleting the OGM of the personal box will also clear its passcode.

Setting a Passcode for a Personal Box

You can set a 3-digit passcode for each personal box. When this is done, the passcode must be entered to listen to messages in a personal box at the machine. (Note: When listening to the messages in a personal box from its corresponding cordless handset, it is not necessary to enter the passcode. )

♦An outgoing message must be recorded for a personal box before a passcode can be set.

1	Press FUNCTION once and			Display:
			once.	T.A.D. SETTING
2	Press	once and	once.	BOX PASSCODE

Answering	System
3.

63